WarmGlass.com

Hi
I want to glue a glass painting to a white base board without the glue showing underneath the transparent glass, any ideas?

I am just about to fuse some dichro glass cufflinks. One problem I always find is that once fired there is a black surround of the dichro glass when I am using dichro with a black base. Can anyone suggest either through firing sched or other ideas that I can have only dichro glass showing?

Just open kiln and my panel is perfect. Thanks everyone for advice.

Thanks everyone.

Oh yes, the thickness is 3mm with fused frit on top.

Hi, the firing schedual is in cent, 85,538,20,85,633,5,465,716,12,Full,488,60,20,445,10,215,150

Yes, I have raised it off the kiln floor to let the air escape through the air holes.

Hi, when slumping a large panel 8" x 15" on a wave mould I always get a large air bubble in the middle of the piece. I have air holes in the mould. The only thing I can think that is causing it is that panel is slight thickness differences in the panel.

Thanks for your reply. The edge of the glass where it cracked is rounded, so it make me think that it cracked during heating up, so I will slow it down.

I have just slumped a dish 11" square. The total thickness of the dish is 6mm, Bullseye glass. The kiln that I am using is a Paragon Fusion 8. The firing schedule whilst annealing is 522c for 1 hour. When I opened the kiln there was a clean crack along the centre of the dish. There must be some...

I am preparing my stock for the Christmas Craft Markets and I would like some ideas on simple Christmas Tree decorations that I can sell, any ideas please.