WarmGlass.com

Brad, Thanks for the quick reply, I'll contact Renato.

Val

Hi there, I've been approached by Eric Westerman from Art Exchange and asI'm skeptic and have never heard of them, I would like to know if anybody here knows of them, or has dealt with them. Any advice would be appreciated. I've included Art-Exchange Link below. http://www.art-exchange.com/art-excha...

I've fused on sttaight on kiln washed shelves and on thinfire paper. Slowest ramp I tried was 250 degrees up to 1000 10 minute soak then 250 up to 1250 soak for 12 minutes. Then down to 950 ASAP and soak 10 mins. The Ceramic molds have not been up above 1300. I will try a slump with fuse side up and...

Has anybody had a problem with coe 96 clear glass getting a cloudy look after slumping. I am trying to take a full fused blank that turned out beautifully clear and slumping without getting a cloudy appearance on the underside. No matter how slow or fast I ramp I still have a cloudy appearance to th...

Thanks to everybody who replied, I've been off-line for a few days so couldn't reply. I love the stands Dick but it isn't what I want, for the mirrors.

Val

I am planning to make some fused mirrors surrounds. My problem is how do you hang them up. Can you somehow fuse wire into the back? Or do you glue some sort of hanger/loop onto the back once it is complete? Any help in this would be appreciated.


Val [/quote]

Very nice work Lyn, I love the engraved horses.

What size are your pendants? How do you engrave so small an area?

Val

What I've found to be the best "glue" is "Marine Goop" I've used it to stick nuggets onto the base of dishes and also to stick the catches onto pins. It's not only handwash proof it will survive the washing machine and dryer. I know as I've left the pins attached to sweaters a fe...

Anybody know where I can get stands in Canada. I love your stands Dick, but unfortunately the cost of getting them north is is awful.


Val

Glad you like my "HIGgies", Laura, I haven't had time to update my site recently but look back in the future and see what I've been busy creating.

Val

Thanks Brock,
I think I will buy a small amount and experiment.

Val

Can anybody tell me if I can use 90 coe confetti with 96 in a tack fuse, also is 96 confetti available? I would like to know before I go out and buy some.

Val

Thanks for the info.

Val

Does anybody know where I can buy cerium oxide in Ontario?

Val

Cahearn, here's a link you might find interesting

http://www.currys.com/knowledge/screenprintinginfo.htm

Val

That must be a fine powder.

Thanks Tom, I'll take a look at their website. Sorry about the truck. and the camera

Val

Nice bowl Greg!!!

Would be interested in purchasing some of that powder, any idea where I can get some.

Val

I was having the same problem through experimenting I found although I couldn't eliminate all frosting I reduced it to the upper inch and a half. results of experiment using spectrum clear - reduce temp. to 1250 or as low as your kiln allows to slump and reduce time to as little as possible. I reduc...

Thanks Bert,
I took a look at the website and they have some very interesting things.

Val