Very very nice!
I like it a lot.
Thanks for sharing
Havi
Search found 617 matches
- Sun Feb 07, 2016 12:21 pm
- Forum: Photos and Stuff
- Topic: Bubble blocks used as memorial.
- Replies: 10
- Views: 17400
- Wed Feb 03, 2016 5:27 pm
- Forum: Techniques and Tools
- Topic: Help me, please
- Replies: 1
- Views: 3987
Help me, please
Hello every body, I broke a piece on which I have worked a lot. Tough! I glued it together, and it is now being fused. It seems to me , that there remained a 'scar' a mark that shows that there was a break there, even though it is probably fixed now. My question is - Is it possible to do something t...
- Mon Jan 25, 2016 3:09 am
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
Re: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
Bert, Brad Walker is a person whose vast knowledge, and responsibility, and generosity in sharing - is something I can not even say how much I appreciate.... Of course his advises and experience is something I cherish and follow - almost with closed eyes. And this goes to Jody too. I asked you, beca...
- Sun Jan 24, 2016 11:42 am
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
Re: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
Thanks Bert,
A nice piece!
I must insist do you PRINT on the glass or paint on it???
I do not paint but PRINT. I believe it is different. And IF you print, has it happened to you that you fired a piece MORE THAN ONCE, with the print on it, and it was not harmed??? Ferro Samba?
THanks,
Havi
A nice piece!
I must insist do you PRINT on the glass or paint on it???
I do not paint but PRINT. I believe it is different. And IF you print, has it happened to you that you fired a piece MORE THAN ONCE, with the print on it, and it was not harmed??? Ferro Samba?
THanks,
Havi
- Sat Jan 23, 2016 5:05 pm
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
Re: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
Thanks, MANY THANKS, Bert and Brad Right now I am doing more wafers, kind of tentatively 'composed' [-not yet fused....] several pieces, and photo'ed them, so that I can decide what I do and HOW I do it. I plan on series, not on a single piece. Once the wafers are fused - I shall start considering p...
- Fri Jan 22, 2016 5:46 pm
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
Re: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
Why would I not want to go to BE bulletin board??? Basically I have learnt SO MUCH on this board, that for me, any other board is only second to warmglass. If I really seek a responsible answer - my first address would be warmglass . however, I am privately on the mailing list of MORGANICA - Cynthia...
- Thu Jan 21, 2016 5:09 pm
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
Re: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
No.
This is CREATIVE GLASS, who sold me. they probably import it, I guess.
However, I take very seriously your comments. printed them, to be put in my working notebook. Hopefully I'll run series of test this Shabbat.
Take care,
And thanks again.
This board is the best!!!
Havi
This is CREATIVE GLASS, who sold me. they probably import it, I guess.
However, I take very seriously your comments. printed them, to be put in my working notebook. Hopefully I'll run series of test this Shabbat.
Take care,
And thanks again.
This board is the best!!!
Havi
- Thu Jan 21, 2016 12:21 pm
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
Re: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
Bert,
I think I have some Samba powders, which I also bought there.
I was told that I could mix it with BE powders, in order to enhance the BE colors, Do you know anything about it???
Thanks
Havi
I think I have some Samba powders, which I also bought there.
I was told that I could mix it with BE powders, in order to enhance the BE colors, Do you know anything about it???
Thanks
Havi
- Thu Jan 21, 2016 11:56 am
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
Re: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
Bert, Bullseye is selling the colorline I mentioned. Just look at the bottles, you will that it is the same. BULLSEYE https://www.bullseyeglass.com/methods-ideas/color-line-paints-a-pens-product-information.html?articleid=752 CREATIVE GLASS / SWITZERLAND http://colorlinepaints.com/products/ At the b...
- Thu Jan 21, 2016 2:16 am
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
Re: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
Thank you Bert, I bought Colorline paints from their manufacturer, who is CREATIVE GLASS in Volketswil Switzerland, near Zurich. Perhaps they have some agreement with BE -behind the curtains. I bought the paints directly form them, as I took several classes there. I know them, and they know me, they...
- Wed Jan 20, 2016 5:05 pm
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
Re: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
Bert, Thanks for your response. However, I can not understand how do know that I am applying a too thick layer of ink????????????????? I wonder. On the contrary, being a printmaker, and my experience as such - I have the feel of how much ink should be applied. I do not know anything about Ferro colo...
- Wed Jan 20, 2016 4:02 am
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
Re: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
Thanks, Don for your response, and analysis of the situation. I wrote to the manufacturers of Colorline paints, sent them photos, and I am expecting their response. I think that perhaps it is time to look for alternative enamels. I want to combine in my work wafers AND prints, 'play' with them and b...
- Sun Jan 17, 2016 5:00 pm
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
- Sun Jan 17, 2016 4:54 pm
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
Re: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
I don't know anything about Colorline enamels. But If you eventually use Brad's sunshine enamels and have problems please describe: 1. Which medium was used. e.g. Pine oil, Water miscible medium, Klyrfyre etc I do not know, I got the enamels in liquid shape 2. Application method. I assume you are s...
- Sat Jan 16, 2016 5:15 pm
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
Re: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
Some enamels have lead. Some enamels have cadmium or other elements, used to create the color, just as do pastels and oil paints. The Sunshine line is lead-based and the colors do have cadmium, etc. Other enamel lines may nor may not have lead, cadmium, etc. The advice to read the MSDS makes sense....
- Sat Jan 16, 2016 4:26 pm
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
Re: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
Thanks, kevin
What do I not want -
ALL liquid enamels? or what.
Thanks in advance,
Havi
What do I not want -
ALL liquid enamels? or what.
Thanks in advance,
Havi
- Sat Jan 16, 2016 12:58 pm
- Forum: Techniques and Tools
- Topic: WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
- Replies: 33
- Views: 45571
WORKING WITH LIQUID ENAMELS OR GLASS PAINTS
Hello everybody. I must be very stupid, or I do not know what. I AM A PRINTMAKER, I know how to print I have a lot of experience from my past studies. Even my graduate exhibition at the university [ages ago.... :D ] was prints. I also work with glass, especially with powders / wafers, now. Those wer...
- Wed Jan 13, 2016 5:09 pm
- Forum: Newcomer Forum
- Topic: FUSING UNDER A PIECE
- Replies: 2
- Views: 6401
Re: FUSING UNDER A PIECE
Thanks, Dana finally I made a small experiment [no answer here......................... so I had to :D ] I fired at the same firing 4 pieces 1. On fiber 3 mil. - came out with the image standing out of the piece. 2. On the kiln shelf - came out flat, and so did 3. and 4. on 2 mil. fiber paper NO air...
- Mon Jan 11, 2016 4:41 pm
- Forum: Newcomer Forum
- Topic: CONCAVITY in a VERMICULITE board
- Replies: 5
- Views: 10506
Re: CONCAVITY in a VERMICULITE board
Thanx, Bert
Right now I am using a smaller ceramic shelf, which works quite OK for me/
Perhaps tomorrow i'll give the V a chance.
Thanks a lot, you and the others
H.
Right now I am using a smaller ceramic shelf, which works quite OK for me/
Perhaps tomorrow i'll give the V a chance.
Thanks a lot, you and the others
H.
- Sun Jan 10, 2016 4:53 pm
- Forum: Newcomer Forum
- Topic: CONCAVITY in a VERMICULITE board
- Replies: 5
- Views: 10506
Re: CONCAVITY in a VERMICULITE board
Thank you ,
Bert and Tim,
Actually when I applied the kiln wash the cavity seems to have disappeared. But I'll keep your advises, if anything develops
very grateful,
Havi
Bert and Tim,
Actually when I applied the kiln wash the cavity seems to have disappeared. But I'll keep your advises, if anything develops
very grateful,
Havi