Search found 617 matches
- Mon Jan 01, 2024 12:10 pm
- Forum: Techniques and Tools
- Topic: NEW GLASS REVIEW
- Replies: 2
- Views: 11162
Re: NEW GLASS REVIEW
Many thanks , Brad I was hoping you'll have some good advice, and so it was. Changed to 'Firefox', also changed credit card to Amex, everything went swiftly. Lucky that I saved the application, therefore needed only to deal with the payment. I sent several pieces which deal and are inspires by the c...
- Sun Dec 31, 2023 5:23 pm
- Forum: Techniques and Tools
- Topic: NEW GLASS REVIEW
- Replies: 2
- Views: 11162
NEW GLASS REVIEW
HAPPY NEW YEAR EVERY BODY While you are celebrating, i am suffering ............... nevermind, its kind of stupid joke. However, i am aware that this is probably the wrong place to post, hopefully it will be transferred to the right place, and even more - hopefully my problem be solved. so I have r...
- Sat Dec 30, 2023 4:44 pm
- Forum: Techniques and Tools
- Topic: damming circles
- Replies: 9
- Views: 25893
Re: damming circles
Hi
I am busy with other stuff, have not yet reached this..
Once I get there I shall post my thoughts and performance. I think i shall use 3m'm fiber paper.
Thanks,
Havi
I am busy with other stuff, have not yet reached this..
Once I get there I shall post my thoughts and performance. I think i shall use 3m'm fiber paper.
Thanks,
Havi
- Mon Dec 18, 2023 4:27 pm
- Forum: Techniques and Tools
- Topic: damming circles
- Replies: 9
- Views: 25893
Re: damming circles
Many thanks, Brad
However, I forgot the most important issue -
I plan to create a round sheet from scrap - and this is more problematic, I am afraid.
I want to do a piece with powders - the way Parrish works, -
Hope to be successful
thanks again,
Havi
However, I forgot the most important issue -
I plan to create a round sheet from scrap - and this is more problematic, I am afraid.
I want to do a piece with powders - the way Parrish works, -
Hope to be successful
thanks again,
Havi
- Mon Dec 18, 2023 2:58 am
- Forum: Techniques and Tools
- Topic: damming circles
- Replies: 9
- Views: 25893
Re: damming circles
Thanks, dear Brad!
Can I use additionally copper sheet to strengthen the fiber? [not sure I have that many kiln posts]
Thanks
Havi
Can I use additionally copper sheet to strengthen the fiber? [not sure I have that many kiln posts]
Thanks
Havi
- Sun Dec 17, 2023 6:22 pm
- Forum: Techniques and Tools
- Topic: damming circles
- Replies: 9
- Views: 25893
damming circles
Hi everybody,
How would I dam a circle about 12" to 15" round, NOT having SS in Israel...
I would appreciate your comments.
many thanks,
Havi
How would I dam a circle about 12" to 15" round, NOT having SS in Israel...
I would appreciate your comments.
many thanks,
Havi
- Sun Nov 26, 2023 7:59 am
- Forum: Newcomer Forum
- Topic: Fusing Euroboros and Bullseye
- Replies: 0
- Views: 84212
Fusing Euroboros and Bullseye
Hello everybody,
Happy Thanksgiving
I have a stupid question..................
Has anybody of you fused together Bullseye Glass, with Euroboros - and it survived?
I know they are the same COE, but heard that still it does'nt work
Can anybody help?
many thanks in advance,
Havi
Happy Thanksgiving
I have a stupid question..................
Has anybody of you fused together Bullseye Glass, with Euroboros - and it survived?
I know they are the same COE, but heard that still it does'nt work
Can anybody help?
many thanks in advance,
Havi
- Tue Oct 24, 2023 2:10 pm
- Forum: Techniques and Tools
- Topic: Silk screen, powders.... enamels etc.
- Replies: 12
- Views: 25980
Re: Silk screen, powders.... enamels etc.
Many thanks, Willy 66,
The thing is that i was thinking of printing on GLASS, not paper or fabric.
Also I might have wanted to fire the glass. So I guess it needs to be taken to considreation while printing - lest it will burn out when being fired.
still, many thanks,
H
The thing is that i was thinking of printing on GLASS, not paper or fabric.
Also I might have wanted to fire the glass. So I guess it needs to be taken to considreation while printing - lest it will burn out when being fired.
still, many thanks,
H
- Sun May 21, 2023 4:20 pm
- Forum: Techniques and Tools
- Topic: Polishing by using Glass powder - at what temp.?
- Replies: 5
- Views: 12619
Re: Polishing by using Glass powder - at what temp.?
Hi everybody, As promised, I shall try post the results. To be honest the peice went thru several additional firings, as it did not shine enough. Then i added the stringers, and realized it was too much, so, refired and covered part................ Once I saw the piece, its name hit me HEAT WAVE .at...
- Sun Apr 30, 2023 3:04 pm
- Forum: Photos and Stuff
- Topic: a new exhibition, at Israel National Conference Ctr. in Jerusalem
- Replies: 4
- Views: 19750
Re: a new exhibition, at Israel National Conference Ctr. in Jerusalem
Yes, it is exciting,
I am very grateful for this opportunity.
and even more, grateful for you attention.
H.
I am very grateful for this opportunity.
and even more, grateful for you attention.
H.
- Sat Apr 22, 2023 2:05 pm
- Forum: Photos and Stuff
- Topic: a new exhibition, at Israel National Conference Ctr. in Jerusalem
- Replies: 4
- Views: 19750
Re: a new exhibition, at Israel National Conference Ctr. in Jerusalem
Thanks Dana,
How are you? Good to 'see' you...
Some of these had been exhibited in one of the glass biennale's at Israel Craft Museum in Tel Aviv .
thanks,
H.
How are you? Good to 'see' you...
Some of these had been exhibited in one of the glass biennale's at Israel Craft Museum in Tel Aviv .
thanks,
H.
- Fri Apr 21, 2023 11:16 am
- Forum: Photos and Stuff
- Topic: a new exhibition, at Israel National Conference Ctr. in Jerusalem
- Replies: 4
- Views: 19750
a new exhibition, at Israel National Conference Ctr. in Jerusalem
Hi everybody, I am honored and happy and obliged to share with you, that some of my glass art is being exhibited in Jerusalem At The Israel National Conference Center in Jerusalem. Very grateful for that, Really not self understood. Many thanks for helping me on this board, all along the way Havi בנ...
- Fri Apr 21, 2023 11:10 am
- Forum: Techniques and Tools
- Topic: Polishing by using Glass powder - at what temp.?
- Replies: 5
- Views: 12619
Re: Polishing by using Glass powder - at what temp.?
Hopefully there will be what to show
Then, I'll post a photo
Thanks for the interest.
H.
Then, I'll post a photo
Thanks for the interest.
H.
- Wed Apr 19, 2023 1:21 pm
- Forum: Techniques and Tools
- Topic: Polishing by using Glass powder - at what temp.?
- Replies: 5
- Views: 12619
Re: Polishing by using Glass powder - at what temp.?
Thanks Brad,
Hopefully will fire tonight
Havi
Hopefully will fire tonight
Havi
- Wed Apr 19, 2023 3:05 am
- Forum: Techniques and Tools
- Topic: Polishing by using Glass powder - at what temp.?
- Replies: 5
- Views: 12619
Polishing by using Glass powder - at what temp.?
Hi everybody, Long time no see, good to be back here, and good to see some familiar names. This board had always helped me [I mean to people who participate..] Hope you are all well! I want to polish a piece by covering it with BE cloear transparent powder [1401 or 1101 /08] what temprature should I...
- Mon Jan 23, 2023 2:49 pm
- Forum: Photos and Stuff
- Topic: New work
- Replies: 5
- Views: 20894
Re: New work
Beautiful! wonderful colors.
Thanks for sharing
Havi
Thanks for sharing
Havi
- Tue Dec 14, 2021 3:33 pm
- Forum: Techniques and Tools
- Topic: Bartlett controller V6-CF - resetting a programme, HOW?
- Replies: 7
- Views: 14328
- Mon Dec 13, 2021 3:23 am
- Forum: Techniques and Tools
- Topic: Bartlett controller V6-CF - resetting a programme, HOW?
- Replies: 7
- Views: 14328
Re: Bartlett controller V6-CF - resetting a programme, HOW?
Many thanks, Sherry!
It was MY mistake - I mistook the second "S" in 'segs' to the number 5 - therefore did not know what to do. The next morning talked to the electrician who installed the controller, and he led me to the solution.
Very grateful for your response and links.
Havi
It was MY mistake - I mistook the second "S" in 'segs' to the number 5 - therefore did not know what to do. The next morning talked to the electrician who installed the controller, and he led me to the solution.
Very grateful for your response and links.
Havi
- Sat Nov 27, 2021 6:29 pm
- Forum: Techniques and Tools
- Topic: Bartlett controller V6-CF - resetting a programme, HOW?
- Replies: 7
- Views: 14328
Re: Bartlett controller V6-CF - resetting a programme, HOW?
Thanx Mark, will try to unplag, but its after midnight here - hopefully it will be OK tomorrow morning. Anyhow, is'nt there a more noraml method to do this? I have just read again half of the manual, could'nt find an answer. Tomorrow [regular working day here] I shall call the person who installed t...
- Sat Nov 27, 2021 5:50 pm
- Forum: Techniques and Tools
- Topic: Bartlett controller V6-CF - resetting a programme, HOW?
- Replies: 7
- Views: 14328
Bartlett controller V6-CF - resetting a programme, HOW?
Happy Holidays, Dear friends Hello everybody, Almost midnight here in Israel - and i can't activate my controller...............ugh I need to change a programme from 5 segments to 9 ... I do'nt know how.... if I have no choice - 8 segments will be OK too. I checked the manual, found no answer to thi...