Search found 89 matches
- Wed Jul 08, 2015 5:30 pm
- Forum: Techniques and Tools
- Topic: glue
- Replies: 6
- Views: 9135
Re: glue
I find that you can not beat Loctite products. their catalog even lists all materials and shows you what glue for what . I use Loctite hysol h30cl. It works great, dries crystal clear and holds a lot of weight.
- Fri Jul 03, 2015 1:22 pm
- Forum: Techniques and Tools
- Topic: challenges making a glass mask
- Replies: 7
- Views: 15131
Re: challenges making a glass mask
silly question but did you kiln wash the mold first? If so, then probably a firing schedule problem
- Mon Jun 29, 2015 8:52 pm
- Forum: Techniques and Tools
- Topic: MR97 problems HELP
- Replies: 3
- Views: 6122
Re: MR97 problems HELP
I know I sound like a broken record, but I still say kiln wash is better. I use BE kiln wash and have never had a sticking or devit problem.
- Mon Jun 22, 2015 12:53 pm
- Forum: Techniques and Tools
- Topic: spray kiln shelf
- Replies: 6
- Views: 11968
Re: spray kiln shelf
I agree with the haik brush if you do not have a sprayer. One tip for even smoother is that after you have all your coats on, get a bowl of hot water and using the haik brush dip and make one pass over entire shelf. I redip after each pass. removes all the brush marks
- Sun Jun 21, 2015 9:07 pm
- Forum: Techniques and Tools
- Topic: Corelite kiln shelf questions
- Replies: 4
- Views: 8313
Re: Corelite kiln shelf questions
The main reason for an initial firing is to make sure all water is out of these. On the Dysons they retained some water from the extrusion process, so a one time firing is needed to drive out physical and chemical water. much like a bisque firing. Firing is below. Sanding is ok, and the more you scr...
- Sun Jun 21, 2015 9:02 pm
- Forum: Techniques and Tools
- Topic: spray kiln shelf
- Replies: 6
- Views: 11968
Re: spray kiln shelf
I assume you mean spray on kiln wash. Usually the particles are too big for those sprayers. I use an air sprayer on mine. Why use thin fire at all? Just as easy to scrape and recoat
- Sat Jun 13, 2015 7:20 pm
- Forum: Kiln Casting
- Topic: large kiln firing
- Replies: 6
- Views: 11224
Re: large kiln firing
You really can not answer this question, without some more info. Especially thickness but is this in a mold, covered with investment, and if so what kind? What type and color of glass. All of this comes into play. It is correct that you may want to hold at 1000 and then go to annealing or just a lon...
- Sat Jun 13, 2015 7:16 pm
- Forum: Techniques and Tools
- Topic: French Vanilla Woes
- Replies: 5
- Views: 9887
Re: French Vanilla Woes
Have you tried a small sample, with 2 layers of French vanilla, and then accent pieces and fire a little lower, say 1450?
- Sat Jun 13, 2015 7:13 pm
- Forum: Techniques and Tools
- Topic: angle grinder without water supply?
- Replies: 6
- Views: 10652
Re: angle grinder without water supply?
If you are buying a grinder anyway and have the money, buy a wet grinder now, and you will have it for when you do get a water source. I like the Alpha but Bob has stuff to look at on His Glassworks, so check them out.
- Sat Jun 13, 2015 7:10 pm
- Forum: Techniques and Tools
- Topic: Leponitt Heavy duty pliers - no plastic - do they work?
- Replies: 15
- Views: 23019
Re: Leponitt Heavy duty pliers - no plastic - do they work?
I have the toyo heavy duty and they are great. I have the cheaper BE pliers, and it is true that the plastic wears pretty quickly. I used what I use for my tools, and dipped them in the plasti dip and they work great.
- Sat Jun 13, 2015 6:50 pm
- Forum: Techniques and Tools
- Topic: Glues - Update
- Replies: 9
- Views: 21216
Re: Glues - Update
Loctite is my go to almost exclusively. Get their catalog and there is an adhesive choice page showing what it bonds to, substrates etc. They carry everything from uv to epoxy, rubber etc.
- Sat Jun 13, 2015 6:46 pm
- Forum: Techniques and Tools
- Topic: PVA Dry Disc Polishing
- Replies: 7
- Views: 12743
Re: PVA Dry Disc Polishing
Always better to add even a little water. I have used the peel off pads from CR Laurence that they use for windshields etc. and I suppose if you went super slow it might work, but faster, and more efficient and healthy if you use water. Even when cutting kiln shelves, which can be done dry, it is fa...
- Sat Jun 13, 2015 6:43 pm
- Forum: Techniques and Tools
- Topic: finding a diamond grinding wheel
- Replies: 6
- Views: 8433
Re: finding a diamond grinding wheel
Thanks Tony and Brad. Looking for 4" with 5/8" x 11 threads for angle grinder. Coarse or rough grit. The photos show the idea of the wheel, as I have seen several shapes, but basically like this. My new work uses this as in the other photo.
- Fri Jun 12, 2015 4:20 pm
- Forum: Techniques and Tools
- Topic: finding a diamond grinding wheel
- Replies: 6
- Views: 8433
finding a diamond grinding wheel
HI. I need to find a supply of 4" concave diamond wheel, sometimes called cup wheel for my angle grinder. Also, asking Bob at HIS. I have used at Pilchuck, but all I find are straight profiles. I checked Ebay, granite stores, and online and am having trouble. Anyone know? If not, I will be at P...
- Mon Jan 26, 2015 3:05 pm
- Forum: Techniques and Tools
- Topic: Hang your Glass glue
- Replies: 16
- Views: 28893
Re: Hang your Glass glue
Loctite hysol h30cl. Crystal clear, two part epoxy, uses a gun and stir rods for automatic mixing.
- Thu Feb 13, 2014 3:51 pm
- Forum: Techniques and Tools
- Topic: thick glass
- Replies: 5
- Views: 7190
Re: thick glass
thanks I will check it out
- Wed Feb 12, 2014 11:24 pm
- Forum: Techniques and Tools
- Topic: thick glass
- Replies: 5
- Views: 7190
thick glass
Hi. Does anyone have a source of thick clear glass? need about 20 pieces about 6" x8" in either 1" or 1.5 inches thick. Can be float. Not cost effective to make, plus I don't want lines from sheet glass.
Thanks
Dick
Thanks
Dick
- Sun Jul 07, 2013 8:37 pm
- Forum: Techniques and Tools
- Topic: What is in shelf paper?
- Replies: 13
- Views: 15181
Re: What is in shelf paper?
kiln wash, kiln wash, kiln wash. I am always surprised by the number of people who always use fiber instead of kiln wash. I agree there are times you almost have to, but most of the time you don't. With kiln wash the surface is better, less other problems such as devit, less expense, and less toxic ...
- Sun Jul 07, 2013 8:30 pm
- Forum: Techniques and Tools
- Topic: Tile Saw problem
- Replies: 7
- Views: 9308
Re: Tile Saw problem
I second the torch. When I disassembled my wet belt, I could not separate the wheels off, and tried everything. Hitting it with a small propane torch did the job
- Sun Jul 07, 2013 8:28 pm
- Forum: Techniques and Tools
- Topic: Dichro frit?
- Replies: 7
- Views: 9319
Re: Dichro frit?
The disadvantage with making dichro frit, is that it is only coated on one side, so when you fuse you don't have control of where the dichro is (although it could be an interesting look) CBS coats the frit on all sides, so you always have dichro showing