Bartlett controller V6-CF - resetting a programme, HOW? - WarmGlass.com

Bartlett controller V6-CF - resetting a programme, HOW?

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Tony Smith, Brad Walker

Post Reply
Havi
Posts: 603
Joined: Wed Jul 02, 2003 6:01 am
Location: Israel
Contact:

Bartlett controller V6-CF - resetting a programme, HOW?

Postby Havi » Sat Nov 27, 2021 5:50 pm

Happy Holidays, Dear friends
Hello everybody,
Almost midnight here in Israel - and i can't activate my controller...............ugh
I need to change a programme from 5 segments to 9 ... I do'nt know how.... if I have no choice - 8 segments will be OK too.
I checked the manual, found no answer to this.
I tried to use the reset button - nothing!!!
Am I stupid, or is the controller broken,

I am so frustrated that I am losing all the night hours that the kiln might have worked...
Please help me...
And many thanks in advance,

Havi
Haviva Z
- - - - with a smile :)

"Speed comes from the Devil" - (an Arabic proverb)
Image
http://www.havivaz.com

Mark Hughes
Posts: 42
Joined: Mon Mar 17, 2003 6:27 pm
Location: Omaha, Nebraska

Re: Bartlett controller V6-CF - resetting a programme, HOW?

Postby Mark Hughes » Sat Nov 27, 2021 6:23 pm

Havi, have you tried turning it off & unplugging it for an hour and then replug it in & setting the new program? If this doesn't work check circuit breaker or fuses.
Mark Hughes

Havi
Posts: 603
Joined: Wed Jul 02, 2003 6:01 am
Location: Israel
Contact:

Re: Bartlett controller V6-CF - resetting a programme, HOW?

Postby Havi » Sat Nov 27, 2021 6:29 pm

Thanx Mark, will try to unplag, but its after midnight here - hopefully it will be OK tomorrow morning.
Anyhow, is'nt there a more noraml method to do this?
I have just read again half of the manual, could'nt find an answer. Tomorrow [regular working day here] I shall call the person who installed this, and see if he knows..

Thanhs, anyway
Haviva Z
- - - - with a smile :)

"Speed comes from the Devil" - (an Arabic proverb)
Image
http://www.havivaz.com

Sherry Salito-Forsen
Posts: 25
Joined: Sun Mar 09, 2003 6:24 pm
Location: San Clemente,CA
Contact:

Re: Bartlett controller V6-CF - resetting a programme, HOW?

Postby Sherry Salito-Forsen » Sun Dec 12, 2021 6:07 pm


Sherry Salito-Forsen
Posts: 25
Joined: Sun Mar 09, 2003 6:24 pm
Location: San Clemente,CA
Contact:

Re: Bartlett controller V6-CF - resetting a programme, HOW?

Postby Sherry Salito-Forsen » Sun Dec 12, 2021 6:15 pm

Try this link, they have lots of videos on controller. http://bartinst.com/

Havi
Posts: 603
Joined: Wed Jul 02, 2003 6:01 am
Location: Israel
Contact:

Re: Bartlett controller V6-CF - resetting a programme, HOW?

Postby Havi » Mon Dec 13, 2021 3:23 am

Many thanks, Sherry!

It was MY mistake - I mistook the second "S" in 'segs' to the number 5 - therefore did not know what to do. The next morning talked to the electrician who installed the controller, and he led me to the solution.

Very grateful for your response and links.

Havi
Haviva Z
- - - - with a smile :)

"Speed comes from the Devil" - (an Arabic proverb)
Image
http://www.havivaz.com

Sherry Salito-Forsen
Posts: 25
Joined: Sun Mar 09, 2003 6:24 pm
Location: San Clemente,CA
Contact:

Re: Bartlett controller V6-CF - resetting a programme, HOW?

Postby Sherry Salito-Forsen » Mon Dec 13, 2021 5:39 pm

Glad you got it figured out. I just got their Genesis controller and working on figuring that out.

Havi
Posts: 603
Joined: Wed Jul 02, 2003 6:01 am
Location: Israel
Contact:

Re: Bartlett controller V6-CF - resetting a programme, HOW?

Postby Havi » Tue Dec 14, 2021 3:33 pm

:D
Haviva Z
- - - - with a smile :)

"Speed comes from the Devil" - (an Arabic proverb)
Image
http://www.havivaz.com


Post Reply

Return to “Techniques and Tools”

Who is online

Users browsing this forum: No registered users and 27 guests

Warm Glass

2575 Old Glory Road, Suite 700
Suite 700
Clemmons, NC 27012
Phone: (336) 712 8003
Email: wg@warmglass.com