Silver Art Clay

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Judi R
Posts: 6
Joined: Tue Apr 01, 2003 2:45 pm
Location: San Carlos, CA

Silver Art Clay

Post by Judi R »

Does anyone out there know of a good source for silver art clay? There's a low-temp version that fuses at glass-fusing temps - but I'm finding all sources to be around the same price, $14 - $19 for 10 gr. Any ideas? :?:
dee
Posts: 302
Joined: Tue Mar 11, 2003 5:20 pm
Location: Atlanta GA
Contact:

Re: Silver Art Clay

Post by dee »

jjrentschler wrote:Does anyone out there know of a good source for silver art clay? There's a low-temp version that fuses at glass-fusing temps - but I'm finding all sources to be around the same price, $14 - $19 for 10 gr. Any ideas? :?:
it's expensive stuff - pmc 3 fires at the lowest temp and pmc + is lower than the original if i remember correctly, try aaproducts.com, so far i have found they have the best pricing on this stuff....

D
Dee Janssen
Unicorn's Creations Studio
http://ucjewelry.com
dee@ucjewelry.com
KatyPattison
Posts: 21
Joined: Sun Mar 09, 2003 4:51 pm
Location: Canada
Contact:

Post by KatyPattison »

Have you tried http://www.artclayworld.com? They have a store and you can purchase all their products on line.

I still like ACS more than PMC for glass because it still shrinks less than their PMC (3 or + I can't remember which is the equivalent). Personal preference only.

Katy
Post Reply