Page 1 of 1
T-Fal Forms
Posted: Tue Nov 25, 2014 10:41 pm
by Jerrwel
I just found a T-Fal coated cooking utensil that would make a great slumping mold if safe. I read a generalized MSDS on T-Fal which did not address what happens in temperatures greater than 350F. While sandblasting the item is probably what I'll do to remove the coating, I do wonder about the consequence of firing T-Fal in a kiln. Anyone have any info?
Re: T-Fal Forms
Posted: Thu Nov 27, 2014 9:03 pm
by jim burchett
You can try it in your kiln and let us know....
Re: T-Fal Forms
Posted: Thu Nov 27, 2014 11:53 pm
by suds
The teflon will burn off in the kiln and the byproducts of decomposition are probably pretty nasty.
I would be very hesitant to put T-fal in a kiln for fear of contamination or element damage and I sure as hell wouldn't do it unless the kiln was outdoors or extremely well ventilated tot he outside world.
I think I'd sandblast all the teflon off if I really wanted to use it.
Re: T-Fal Forms
Posted: Fri Nov 28, 2014 11:01 am
by rosanna gusler
yep toxic as hell to burn off. r.
Re: T-Fal Forms
Posted: Sat Nov 29, 2014 6:47 am
by Marty
http://www.t-falusa.com/Consumer+servic ... 59FBCB4%7D
I didn't bother to find out what the metal is.
Don't.
Re: T-Fal Forms
Posted: Sat Nov 29, 2014 11:54 am
by suds