I've been experimenting with dichro in making bracelets. I just received a full sheet of DT2 pattern on Bullseye Thin Black glass from CBS. Now for the dumb question:
When fired, will the obvious pattern diffuse? ie: will the dots blend out?
Dumb question....
Moderators: Brad Walker, Tony Smith
Dumb question....
"When I was a boy I was told that anybody could become President;
I'm beginning to believe it."
-- Clarence Seward Darrow (1857-1938)
I'm beginning to believe it."
-- Clarence Seward Darrow (1857-1938)
someone else once mentioned that they had designed a pendant featuring a single dichroic dot. that could look good, especially if you put a piece of clear over the dot to add depth.
if the dots were on clear instead of black, you could overlay them upside down on other dichro, and probably get a neat effect. i dont use dichro on black, so i'm not much help in offering tips.
if the dots were on clear instead of black, you could overlay them upside down on other dichro, and probably get a neat effect. i dont use dichro on black, so i'm not much help in offering tips.
-
- Posts: 1037
- Joined: Sun Mar 09, 2003 5:59 pm
- Location: Massachusetts, USA
- Contact:
Lorelei,
Did you buy directly from CBS? You might call them and ask them if you can return it for a solid or one of their other patterns... as long as the sheet is undamaged, uncut, etc... they may take it back... you never know unless you ask.
Tony
Did you buy directly from CBS? You might call them and ask them if you can return it for a solid or one of their other patterns... as long as the sheet is undamaged, uncut, etc... they may take it back... you never know unless you ask.
Tony
The tightrope between being strange and being creative is too narrow to walk without occasionally landing on both sides..." Scott Berkun