Adjusting Your Chicago Tile Saw Part Four
Moderators: Brad Walker, Tony Smith
Adjusting Your Chicago Tile Saw Part Four
The water flow wasn't correct on my saw either. The tubes were too far away from the blade.
Remove the screw that holds the " Y " shape piece. Slide the two tubes forward until they are almost touching. Then drill a new hole and re-install a new screw with a nut on the bottom. (I have a small spring clamp holding mine in place cause I'm lazy.)
[/img]http://users.wi.net/~magnum/Saw/7.JPG[img]
Good Luck.
Randy[/img]
Remove the screw that holds the " Y " shape piece. Slide the two tubes forward until they are almost touching. Then drill a new hole and re-install a new screw with a nut on the bottom. (I have a small spring clamp holding mine in place cause I'm lazy.)
[/img]http://users.wi.net/~magnum/Saw/7.JPG[img]
Good Luck.
Randy[/img]
-
- Posts: 126
- Joined: Mon Mar 17, 2003 10:52 pm
- Location: Utah
- Contact:
-
- Posts: 126
- Joined: Mon Mar 17, 2003 10:52 pm
- Location: Utah
- Contact:
-
- Posts: 17
- Joined: Mon Mar 10, 2003 1:29 pm
- Location: Venice, Florida
-
- Posts: 126
- Joined: Mon Mar 17, 2003 10:52 pm
- Location: Utah
- Contact:
-
- Posts: 126
- Joined: Mon Mar 17, 2003 10:52 pm
- Location: Utah
- Contact:
-
- Posts: 212
- Joined: Sun Mar 09, 2003 3:23 pm
- Location: Memphis, TN
- Contact:
I'm not Randy, but I had the same problem and called MK. They recommended WD-40 and mine slides great now.Rob Morey wrote:Randy,
Great post. Thank you very much. What do you use to lubricate the bar slide? Mine is very sticky.
Rob
Lisa
Lisa Allen
http://www.lisa-allen.com
Today's mighty oak is just yesterday's nut that held its ground.
http://www.lisa-allen.com
Today's mighty oak is just yesterday's nut that held its ground.
-
- Posts: 478
- Joined: Sun Mar 09, 2003 10:37 pm
- Location: Hillsboro Oregon
- Contact:
If you are using an older version of netscape that will happen. I used to have that problem with netscape 4.7. I just upograded to netscape 7.1 and all of thjose problems went away.Jack Bowman wrote:Why does the picture cover the text on my screen. Maybe I was sick the day we studied how to get the pix out of the way.
Jack
Jim
-
- Posts: 126
- Joined: Mon Mar 17, 2003 10:52 pm
- Location: Utah
- Contact: