Costa Rica

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Mira
Posts: 92
Joined: Sat Apr 26, 2003 6:55 pm
Location: California
Contact:
Contact Mira

Costa Rica

Post by Mira »

Does any one work from Costa Rica, and if so, are glass and supplies available?
Top
charlie
Posts: 961
Joined: Mon Mar 10, 2003 3:08 pm

Post by charlie »

there was sometime in the past. click on memberlist and sort on location. you'll have to do a lot of scrolling, since a good percentage of users on this board didn't specify a location when they signed up.
Top
Dione Roberts
Posts: 9
Joined: Mon Sep 08, 2003 10:36 pm

Post by Dione Roberts »

Try Desposito Barrio Lujan
Calle 15 Avenidas 14/16
San Jose, Costa Rica 2961-1000
Phone 011-506-221-1344
You can email Jaime Cabezas
importel@racsa.co.cr

I have emailed Jaime before and he seems to be very nice.and would help you. From emails I have had with him he seems to have a large selections of supplies.

Dione Roberts
Top
Israel
Posts: 2
Joined: Wed Mar 19, 2003 5:58 pm
Location: San Jose, Costa Rica

Re: Costa Rica

Post by Israel »

Mira Woodworth wrote:Does any one work from Costa Rica, and if so, are glass and supplies available?
Mira, i live in Costa Rica and have all the supplies.

Regards
Israel Zonzinski
gmusical@racsa.co.cr
Top
vidrio
Posts: 21
Joined: Thu Sep 04, 2003 7:14 pm

Re: Costa Rica

Post by vidrio »

Israel wrote:
Mira Woodworth wrote:Does any one work from Costa Rica, and if so, are glass and supplies available?
Mira, i live in Costa Rica and have all the supplies.

Regards
Israel Zonzinski
gmusical@racsa.co.cr
Hi,

Live in CR too. Do you have a shop with glass supplies? In San Jose?

Thanks Vidrio
Top
Post Reply

Return to “Techniques and Tools”