Hello everyone, I am looking for some help locating a picture I saw before of a beautiful wall mounting. It was a mounting of some flat pieces of glass hung vertically under a horizontal rail system. Think closet door for the railing type piece. The rail was only on the top, and the pieces hung from a thick rod or tube with a bracket/clamp thingy that held the glass from above.
Any and all help appreciated.
Anea
aka
Aimee
rail mounting for wall sculpture
Moderators: Brad Walker, Tony Smith
-
- Posts: 382
- Joined: Sun Mar 09, 2003 8:10 pm
- Location: Washington DC Metropolitan Area
- Contact:
You can find some interesting stuff here Anea;
http://www.fairfielddisplays.co.uk/prod ... pports.htm
and contact them in the US at displays@voicenet.com
http://www.fairfielddisplays.co.uk/prod ... pports.htm
and contact them in the US at displays@voicenet.com
It ain't where you're from, it's where you're at!
-
- Posts: 468
- Joined: Sun Mar 09, 2003 3:20 pm
- Location: Columbus, Ohio USA
Thanks for the sites everyone.
Ron - it is similar to "The Veil" in that it has a rail at top, but I want mine to be mounted on the wall and for the pieces to be able to slide left and right. I am so close.
I have just drawn up what I want and am going to meet with fabriactors tomorrow and sunday.
thanks again to all who have replied,
aimee
Ron - it is similar to "The Veil" in that it has a rail at top, but I want mine to be mounted on the wall and for the pieces to be able to slide left and right. I am so close.
I have just drawn up what I want and am going to meet with fabriactors tomorrow and sunday.
thanks again to all who have replied,
aimee