Ok guys, I may attempt to build my own kiln one day, but putting together a sander I find a wee bit daunting. Especially after the shock discussion. some find my life shocking enough! (Yes I really do live year round on an island with no fast food or malls. Going off island to a CVS is exciting; ahh but the beauty and peace and the opportunity to do 30 to 40 shows without leaving home)
Soooo, I have a hot glass friend who says Somaca, and many on board use Covington I want my new toy now of course but still not sure what to seek out. HELP
One day my sander will come!
Jeri
Last edited by Jeri D on Tue Oct 28, 2003 12:33 pm, edited 1 time in total.
CRLaurence only sells to industry (typically the glazing industry), but as a glass artist, you shouldn't have any problem getting an account. Their local branch is in Taunton and they usually stock the Bee wet belt sander which actually comes in 3 different models. The (2) 106" floor models cost about $1500 each. I'm not sure what the 64" model costs.
97 Robert Treat Paine Drive
Taunton, MA 02780-1267
Phone: (508) 880-5600
Fax: (508) 880-5775
Tony
The tightrope between being strange and being creative is too narrow to walk without occasionally landing on both sides..." Scott Berkun