glue question...suggestions GREATLY appreciated

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Lynne Chappell
Posts: 186
Joined: Fri Mar 14, 2003 2:05 am
Location: Surrey B.C. Canada
Contact:
Contact Lynne Chappell

Re: glue question...suggestions GREATLY appreciated

Post by Lynne Chappell »

I suspect that if you could see glue, then it didn't fill all the space between the layers. You really need a lot of excess glue to completely fill a space, regardless of the type of glue. Also, silicone is usually watertight, but it is fairly thick so not so easy to spread out, there will be a lot of waste.
Top
Post Reply

Return to “Techniques and Tools”