Denver KL 50-Anybody have one?
Moderators: Brad Walker, Tony Smith
-
- Posts: 328
- Joined: Thu May 29, 2003 11:48 am
- Location: Ithaca,NY
- Contact:
Denver KL 50-Anybody have one?
I have the opportunity to get a used KL50 at a great price, but don't know anyone who has used one. Anybody have comments to share?
-
- Posts: 151
- Joined: Sun Mar 09, 2003 5:42 pm
- Location: Greensboro NC
- Contact:
I like my denver, but you will need to do more upkeep than you would for most kilns. That was a plus for me because it forced me to learn how my kiln works. Now I could build a denver type kiln from scratch. They have a problem with the lid insulation board warping down and resting on the elements. This might knock little bits of fiber board off, and down on to your glass, as the elements move, or worse, break the ceramic rods the elements are strung on. This is what happende to mine. The lid, and the fiberboard in the lid needs reinforcement to keep it flat, so check this link
http://community.webshots.com/album/44600274WEAJPS
a note on this site, next time I would have replaced the lid insulation with fiber blanket.
Read the archives, lots there
Liam
http://community.webshots.com/album/44600274WEAJPS
a note on this site, next time I would have replaced the lid insulation with fiber blanket.
Read the archives, lots there
Liam
-
- Posts: 328
- Joined: Thu May 29, 2003 11:48 am
- Location: Ithaca,NY
- Contact:
Thanks Liam-Great sequence you put together. I keep meaning to document various projects in that way, and you've inspired me. I build my own kilns, and normally would not consider buying another commercial one, but the price is too good to pass up on this, and even if I have to rebuild the lid, the shell alone is worth it. Think I'll gut the lid, replace it with batt and board, and retrofit it with the elements I use in my other kilns. Thanks for the input!
-
- Posts: 21
- Joined: Fri Mar 14, 2003 5:17 pm
- Location: Tallahassee FL
- Contact:
I have a KL60D and I love it. I have had it for about 2 1/2 years. I fire about 3 times a week sometimes everyday. I have had no problems with the lid. I have had to replace the shelves...no problem. I have recommended the kilns to several friends and they have been happy as well. The fiber is holding up beautifully.
I would say go for it!
Lesley
I would say go for it!
Lesley
-
- Posts: 328
- Joined: Thu May 29, 2003 11:48 am
- Location: Ithaca,NY
- Contact: