copper between layers of glass

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Linda Hassur
Posts: 44
Joined: Sat Mar 15, 2003 10:40 pm

Re: copper between layers of glass

Post by Linda Hassur »

The bowl slumped OK and it appears that the mesh didn't shrink. I had a couple problems with the slumping, a tiny piece of the mesh popped through the top layer of glass. Also on the edge, the mesh kept the glass from completely sealing in one spot. Linda
Top
Post Reply

Return to “Techniques and Tools”