Combing tool
Moderators: Brad Walker, Tony Smith
Combing tool
I want to try combing glass in the kiln. What is the best material to make a combing rod or tool? What keeps the glass from sticking to the tool?
What isn't tried won't work. --Claude McDonald
300 series stainless steel. Get a 3/16" or 1/4" rod, about 30" long and grind the tip down to a dull point. Bend the last 2 or 3 inches from the tip down, at an angle, perhaps 45 degrees. Put a handle on it, and comb away. Immerse in water between combs. You'll be an expert on your second comb. Brock
My memory is so good, I can't remember the last time I forgot something . . .
-
- Posts: 195
- Joined: Mon Mar 10, 2003 9:45 pm
- Location: SW FL
- Contact: