This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.
Moderators: Brad Walker, Tony Smith
-
Wayne
- Posts: 5
- Joined: Wed Dec 03, 2003 5:26 pm
- Location: Utah
-
Contact:
Post
by Wayne »
I was just wondering if anyone has used this and if so have any recommendations as the best way to apply and or fire it.
Thanks!
-
Cheryl
- Posts: 239
- Joined: Sun Mar 09, 2003 7:56 pm
- Location: Tallahassee FL
-
Contact:
Post
by Cheryl »
lots of info on this in the archives. in sum: most people were underwhelmed with the results.
-
Stuart Clayman
- Posts: 224
- Joined: Mon Mar 31, 2003 12:35 pm
- Location: Virginia
-
Contact:
Post
by Stuart Clayman »
I even contacted the manufacturer and one of the women that I talked to suggested that I use a spray enamel on the back and don't use their product.
Stuart
-
Wayne
- Posts: 5
- Joined: Wed Dec 03, 2003 5:26 pm
- Location: Utah
-
Contact:
Post
by Wayne »
Thanks Cheryl and Stuart.