Back Magic - Does anyone have experience with this?

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Wayne
Posts: 5
Joined: Wed Dec 03, 2003 5:26 pm
Location: Utah
Contact:
Contact Wayne

Back Magic - Does anyone have experience with this?

Post by Wayne »

I was just wondering if anyone has used this and if so have any recommendations as the best way to apply and or fire it.

Thanks!
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-

Wayne
WM Glass Studios
Image
Top
Cheryl
Posts: 239
Joined: Sun Mar 09, 2003 7:56 pm
Location: Tallahassee FL
Contact:
Contact Cheryl

check the archives

Post by Cheryl »

lots of info on this in the archives. in sum: most people were underwhelmed with the results.
Top
Stuart Clayman
Posts: 224
Joined: Mon Mar 31, 2003 12:35 pm
Location: Virginia
Contact:
Contact Stuart Clayman

Post by Stuart Clayman »

I even contacted the manufacturer and one of the women that I talked to suggested that I use a spray enamel on the back and don't use their product.

Stuart
Top
Wayne
Posts: 5
Joined: Wed Dec 03, 2003 5:26 pm
Location: Utah
Contact:
Contact Wayne

Post by Wayne »

Thanks Cheryl and Stuart.
_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-

Wayne
WM Glass Studios
Image
Top
Post Reply

Return to “Techniques and Tools”