TnF2 sentry controller fuse is out

Mark Hughes · Post by **Mark Hughes** » Wed Feb 04, 2004 7:32 am

Oops first post was on the wrong board, here it goes again.
The fuse on my sentry controller has burned out ( 250V - 1/2a ). I know I won't find it at Home Depot or Lowes. Will I find it at an electricle supply or is it such a specialty item I'll have to get it from Senrtry? The stores don't open for several hours to call around yet & I am hoping to get the 411 here.

Catharine Newell · Post by **Catharine Newell** » Wed Feb 04, 2004 10:37 am

Try Grainger... I've gone to them many times for controller fuses.

Catharine

BobB · Post by **BobB** » Wed Feb 04, 2004 10:57 am

We have a Fused Unlimited close by. http://www.fusesunlimited.com/products.html

I needed some big honking fuses for an electric forklift charger that I had never seen before. I went there and they had it on the shelf.

Just in case, buy 2. Something caused the fuse to blow. If you haven't addressed the reason it blew the new one will also blow.

If you have addressed the reason then the second will be a spare.

BobB