Volcanic glass

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
scooter riegelsperger
Posts: 26
Joined: Fri Mar 14, 2003 9:23 am
Location: Houston,TX
Contact:

Volcanic glass

Post by scooter riegelsperger »

Anybody out there ever heard of volcanic ash glass? I just bought a 5" bowl on ebay that supposedly is made of volcanic ash from Mt. St.Helens.
Says it was made from volcanic ash, from the fallout, fused at 2600 degrees to form volcanic glass. Handcast at Bullseye Glass in Portland.
It has some kind of irid coating on surface with the shape of Mt.St.Helens on top. Glass is transparent, color is kind of drab green color. Stamped 1980- Bullseye Glass on back. Just curious.
Do illiterate people get the full effect of alphabet soup?
charlie
Posts: 961
Joined: Mon Mar 10, 2003 3:08 pm

Post by charlie »

i have some pottery that supposedly has a glaze made from mt st helen's ash. it's blue, with a slight irid coating.
Kim Bellis
Posts: 133
Joined: Sat Jun 14, 2003 9:48 pm
Location: Tampa, Florida
Contact:

Post by Kim Bellis »

I have seen "hanging blown ornaments" that say they are made from volcanic ash. Do not know anything about it - but have seen it.
Rebecca M.
Posts: 126
Joined: Fri Sep 12, 2003 12:15 pm
Location: Myrtle Beach
Contact:

Post by Rebecca M. »

I saw a lot of Mt. St. Helen's glass after the eruption. They have the date right anyway. May 18, 1980 for the first one. I think it blew again after that. I was in the Spokane area at the time. We had been listening to albums all day when the sky got very dark. It looked like a big mother of a storm coming. When the ash started to fall we finally realized what it was.
The only thing is I also saw the M.S.H. ash glass years and years later, and always wondered where they were getting all this ash from? :?
Kitty
Posts: 444
Joined: Sun Mar 09, 2003 4:12 pm
Location: Gig Harbor, WA

Post by Kitty »

i've seen the blown "christmas" ornaments made from the ash. i dont know what the process is. the ones i've seen do have an irid surface.
Dayle Ann
Posts: 20
Joined: Wed Dec 03, 2003 3:51 pm
Location: Vermont
Contact:

Post by Dayle Ann »

I was a potter in Portland at the time Helen blew. For years, I think every potter in the NW at least did a trial of ash for glaze! Some were so-so, but there were also some very beautiful effects. It became kind of a cliche for a while-- lots of people doing tourist souvenir items. Then glass people started using it. I've seen some gorgeous work in galleries, lovely cast and blown work. I wouldn't mind trying it out myself, just for fun, now that I am starting to work with glass (and learning ever so slowly...).

Helen blew several times after the "Big One". There are huge piles of the ash all over the place (we're talking humongous hill-size piles), so it is not hard to find sources of it to use.

Dayle Ann
daffodildeb
Posts: 125
Joined: Mon Jul 28, 2003 3:48 am
Location: Hot Springs Village, AR

Post by daffodildeb »

I have a paperweight from there. It is very iridescent, but I'm not sure if all of that is the Mt. St. Helens glass. Part of it is clear red (like a cranberry); the rest is opaque iridescence.
Deb
Post Reply