frit with a cover?

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
bkrgrl@aol.com
Posts: 18
Joined: Wed Feb 04, 2004 10:57 pm
Location: virginia

frit with a cover?

Post by bkrgrl@aol.com »

Just did my first simple frit piece-looked in the archives and used some hairspray, now question, do I tack it first or put a clear cap on it and full fuse-I could not find an answer in the archives. thanks Gayle
Top
Susan Moore
Posts: 96
Joined: Mon Oct 06, 2003 10:07 pm
Location: Austin, TX
Contact:
Contact Susan Moore

Post by Susan Moore »

Gayle,

You can do either. It depends what look you want and since you are new to this you may as well do up some small samples - do some of each using different size frit, different colours, full fuse, tack fuse, etc.

Susan
Top
Post Reply

Return to “Techniques and Tools”