Flat Lap Technique

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
nbobb
Posts: 25
Joined: Mon Aug 16, 2004 1:35 pm
Location: California
Contact:
Contact nbobb

Re: Flat Lap Technique

Post by nbobb »

Yikes, I admire all of you for your efforts to grind glass disks on a flat lap. I've tried it on small pieces with suction cups and have had problems with the cup slipping loose. I use an angle grinder for flat surfaces - much easier!
Nancy Bobb
Firewalker Studio
http://www.firewalkerstudio.com
Top
Post Reply

Return to “Techniques and Tools”