Ameritools arbor size

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
PDXBarbara
Posts: 292
Joined: Sun Mar 09, 2003 4:09 pm
Location: Portland, OR

Ameritools arbor size

Post by PDXBarbara »

Anybody know the arbor size of the Ameritools 4-inch trim saw?

Debating with myself about getting the Ameritools, or the good ol' Tiny Trim for $100 less. I got my old Tiny Trim used for $35 years ago... but it's totally kaput now. But, I'd like to use my 1/2-inch blades if possible. So, Ameritools vs Tiny trim......... hmmm.
Thanks ya'll.
Barbara
Barbara Bader
Brad Walker
Site Admin
Posts: 1501
Joined: Fri Mar 07, 2003 9:33 pm
Location: North Carolina, USA
Contact:

Re: Ameritools arbor size

Post by Brad Walker »

PDXBarbara
Posts: 292
Joined: Sun Mar 09, 2003 4:09 pm
Location: Portland, OR

Re: Ameritools arbor size

Post by PDXBarbara »

Thanks, Brad... Ameritools didn't have the info on its site, and was to antsy to wait for them to email me.
Hope all is well with you guys.
Best to you,
Barbara
Barbara Bader
twin vision glass
Posts: 570
Joined: Thu Apr 29, 2004 12:55 am
Location: Invermere,B.C. Canada
Contact:

Re: Ameritools arbor size

Post by twin vision glass »

Hey miss Barbara, how the heck are you!!!!! :D
Give out Free Hugs!
website: http://www.twinvision.fusedglassartists.com
Post Reply