Band Saw Recommendation

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Michele-MD
Posts: 26
Joined: Mon Apr 19, 2004 9:03 pm
Location: Ellicott City, MD
Contact:
Contact Michele-MD

Band Saw Recommendation

Post by Michele-MD »

Hi, everyone,

I have had a DL 3000 for years and it has been "ok". I never thought it was very well manufactured as the parts did not exactly line up as described in the manual, but it has been good enough. I am thinking of getting a new saw and would like to know which ones people like, and why. One of the drawbacks to the one I have is that I would like more table space to maneuver larger pieces of glass without the structure of the saw getting in the way when turning the glass. Am willing to get a higher end saw if there is one that is well made and versatile. Thanks for any opinions you can offer. Michele
Top
Rick Wilton
Posts: 273
Joined: Sat Oct 25, 2003 8:18 pm
Location: Calgary, Canada
Contact:
Contact Rick Wilton

Re: Band Saw Recommendation

Post by Rick Wilton »

The only other "decent" bandsaw I know of is from Denver Glass

http://denverglass.com/gs-100.html

Image
Rick Wilton
Top
bhawbaker
Posts: 6
Joined: Sat Aug 13, 2011 8:01 pm

Re: Band Saw Recommendation

Post by bhawbaker »

You might take a look at the Gemini Revolution XT ring saw. While not a band saw, it will handle very thick material (2") and do intricate cuts, especially with the double sided blade. I just got one a few months ago, and think it's terrific.

http://www.geminisaw.com/revolutionxt.html
Top
Post Reply

Return to “Techniques and Tools”