Wait time

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
LCS
Posts: 8
Joined: Mon Aug 20, 2007 9:44 am

Wait time

Post by LCS »

How long do I have to wait after a full fused piece can be draped?
Top
Brad Walker
Site Admin
Posts: 1516
Joined: Fri Mar 07, 2003 9:33 pm
Location: North Carolina, USA
Contact:
Contact Brad Walker

Re: Wait time

Post by Brad Walker »

Do you mean how long after it cools to room temperature or something else?
Top
LCS
Posts: 8
Joined: Mon Aug 20, 2007 9:44 am

Re: Wait time

Post by LCS »

Yes ... after it cools to room temperature.
Top
Brad Walker
Site Admin
Posts: 1516
Joined: Fri Mar 07, 2003 9:33 pm
Location: North Carolina, USA
Contact:
Contact Brad Walker

Re: Wait time

Post by Brad Walker »

If you wait until it cools, you can slump or drape immediately if you wish.
Top
LCS
Posts: 8
Joined: Mon Aug 20, 2007 9:44 am

Re: Wait time

Post by LCS »

THANK YOU!
Top
Post Reply

Return to “Techniques and Tools”