I have a large (20”) ball mold I would like to make undulate on the side surface. It would only need a few areas bumped in to make it more organic. Can this be done with fiber paper or ???
Thanks, Linda
Modifying a slumping mold
Moderators: Brad Walker, Tony Smith
-
Brad Walker
- Site Admin
- Posts: 1516
- Joined: Fri Mar 07, 2003 9:33 pm
- Location: North Carolina, USA
- Contact:
Re: Modifying a slumping mold
Fiber paper will work.
-
makeart365@gmail.com
- Posts: 3
- Joined: Sat Oct 31, 2020 9:39 pm
Re: Modifying a slumping mold
Fiber paper is so thin I don’t know how I would get any raised fluted shape. Is there something to build up the surface under the fiber paper?
Thanks!
Thanks!
-
Brad Walker
- Site Admin
- Posts: 1516
- Joined: Fri Mar 07, 2003 9:33 pm
- Location: North Carolina, USA
- Contact:
Re: Modifying a slumping mold
Fiber paper comes in thicknesses from 1/32" to 1/4". You may be thinking of thinfire paper, which is much thinner.
You could also use fiber blanket, which comes in thicknesses from 1/2" to 4".
You could also use fiber blanket, which comes in thicknesses from 1/2" to 4".
-
JestersBaubles
- Posts: 705
- Joined: Fri Feb 25, 2011 12:01 am
- Location: North Logan, UT
- Contact:
Re: Modifying a slumping mold
These were made in 5" ball surface molds. I used SilkMatte. It works fine for larger pieces as well.
Best, Dana