Bas relief slump

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
M.L.
Posts: 21
Joined: Wed Nov 26, 2003 10:34 pm
Location: Oklahoma

Bas relief slump

Post by M.L. »

Couldn't find in the archive, so here's the question. Float glass circle 10in., 1/4in. glass. Using fiber paper design cut out. When slumping into a SS bowl, will I lose much of the design element. Thanks Mike
Top
Brock
Posts: 1519
Joined: Mon Mar 10, 2003 1:32 pm
Location: Vancouver, B.C.

Re: Bas relief slump

Post by Brock »

Mike Boos wrote:Couldn't find in the archive, so here's the question. Float glass circle 10in., 1/4in. glass. Using fiber paper design cut out. When slumping into a SS bowl, will I lose much of the design element. Thanks Mike
Shouldn't lose any Mike, slump low and slow. Brock
My memory is so good, I can't remember the last time I forgot something . . .
Top
M.L.
Posts: 21
Joined: Wed Nov 26, 2003 10:34 pm
Location: Oklahoma

Post by M.L. »

Thanks Brock. Have a good weekend. Mike
Top
Brock
Posts: 1519
Joined: Mon Mar 10, 2003 1:32 pm
Location: Vancouver, B.C.

Post by Brock »

U2 Mike. Bono
My memory is so good, I can't remember the last time I forgot something . . .
Top
Post Reply

Return to “Techniques and Tools”