Just got my BE catalog today (finally). After going through it about 10 times I was actually able to settle down and really look at everything. Since I have a fondness for black and white pieces I was very interested in the new Stiff Black available. I'm wondering if anyone has used it yet and if so what they thought of it. They say its not as soft as regular black--I'm wondering what it does at different temps and is it more resistant to kiln wash sticking than the regular black? Any info. would be greatly appreciated.
Amy
Stiff Black
Moderators: Brad Walker, Tony Smith
-
- Posts: 270
- Joined: Sun Mar 09, 2003 5:43 pm
- Location: British Columbia, Canada
- Contact:
-
- Posts: 270
- Joined: Sun Mar 09, 2003 5:43 pm
- Location: British Columbia, Canada
- Contact:
I'm getting the impression its only for pieces that are full fused--not for anything sintered or in between sintering and full fuse. I mean at what temp. does its edges soften? If the only benefit is that it doesn't bleed--that isn't an issue in anything less than full fuse.
-A
P.S.Why will it be less shiny Els?
-A
P.S.Why will it be less shiny Els?
Last edited by Amy on Salt Spring on Fri Apr 16, 2004 11:28 am, edited 1 time in total.
-
- Posts: 475
- Joined: Sun Mar 09, 2003 5:01 pm
- Location: Arizona
- Contact: