Slumping Question from Rank Amateur
Moderators: Brad Walker, Tony Smith
-
- Posts: 6
- Joined: Mon Apr 28, 2003 1:11 pm
- Location: NE Tennessee
Slumping Question from Rank Amateur
I just returned from my local restaurant supply store, and my mind is reeling with possibilites for all the cool little stainless steel cups and plates and trays I bought to use as molds.
Here's my question...when slumping INTO a form, is it necessary to have holes drilled in the mold for some kind of a release?
Seems like I read this somewhere, but then again, I could have hallucinated the whole thing.
While I've got you here, what are your recommendations for material to use when making your own molds?
TIA.
Jen
Here's my question...when slumping INTO a form, is it necessary to have holes drilled in the mold for some kind of a release?
Seems like I read this somewhere, but then again, I could have hallucinated the whole thing.
While I've got you here, what are your recommendations for material to use when making your own molds?
TIA.
Jen
mold materials
We purchased some greenware bowls, platter and plates and use them to slump into. They work good. Holes need to be in the bottoms for air release like stainless and the greenware has to be fired to bisque. The pottery place we purchsed the greenware from would fire it to bisque for us for a few dollars per piece and volunteered to drill the holes. We ended up drilling and firing them ourselves. Be sure to kiln wash the bisque molds before use. We also buy low fire clay by the pound to make different mold shapes. Take a flat piece of clay, find some interesting shape and press it into the clay leaving an impression. Fire to bisque, kiln wash and fill with frit. And you have a small kiln casted item.
Stainless steel bowls, cups, etc.. can be purchased from Big Lots, Walmart, garage sales make good molds and can be found failry cheep.
Good luck.
BobB
Stainless steel bowls, cups, etc.. can be purchased from Big Lots, Walmart, garage sales make good molds and can be found failry cheep.
Good luck.
BobB
-
- Posts: 6
- Joined: Mon Apr 28, 2003 1:11 pm
- Location: NE Tennessee
Thanks for your prompt responses! I like the idea of using the greenware. We don't have much in these mountains, but we do have ceramic places a plenty (now if I can just find something other than geese wearing bandanas lawn sculptures and open-mouthed frog soap holders I'll be in business!).
It seems like every object I pick up these days is viewed from the perspective: "Hmmm...what can I make with this?"
I read in the archives about raku clay. Is that the best for easy mold making? I want to slump some glass incense holders...yes, my goals are simple. Can I fire the clay in my Jen-Ken?
So many questions...it's just that I'm so excited to have found this board!
Thanks again,
Jen
It seems like every object I pick up these days is viewed from the perspective: "Hmmm...what can I make with this?"
I read in the archives about raku clay. Is that the best for easy mold making? I want to slump some glass incense holders...yes, my goals are simple. Can I fire the clay in my Jen-Ken?
So many questions...it's just that I'm so excited to have found this board!
Thanks again,
Jen
molds
Might have a big business if you can make pink flamingos from glass. Concentrate on items "your" customers will buy.
Since I'm not a cermaics person I can't speak to Raku clay. I'll leave that to the clay Gods to answer. As to firing in your Jen King. Most ceramic kilns will fire to 2300 degree. I've been told that's the temp to get the bique to "mature". Our glass kiln only goes to 1700. I fired our molds to 1700 and held for an hour. I've been using them over and over for the last 6 months without any problems. It could be more fragile than a fully fired bisque piece, but for our use it's ok.
Good luck, have fun. And by the way you are now officially hooked on glass. enjoy.
BobB
Since I'm not a cermaics person I can't speak to Raku clay. I'll leave that to the clay Gods to answer. As to firing in your Jen King. Most ceramic kilns will fire to 2300 degree. I've been told that's the temp to get the bique to "mature". Our glass kiln only goes to 1700. I fired our molds to 1700 and held for an hour. I've been using them over and over for the last 6 months without any problems. It could be more fragile than a fully fired bisque piece, but for our use it's ok.
Good luck, have fun. And by the way you are now officially hooked on glass. enjoy.
BobB
one more
Oh one more thing. When firing clay in your kiln let them air dry for a couple of days. When you put them in your kiln heat them SLOWLY to 200 degrees, hold for at least an hour (depending how thick they are) then ramp up slowly. If you heat them too fast the moisture inside the clay will heat too fast, become gas(steam) and can cause the mold to explode. It isn't fun cleaning out the reamins of a mold you worked hard on making.
BobB
BobB
-
- Posts: 6
- Joined: Mon Apr 28, 2003 1:11 pm
- Location: NE Tennessee
Glass flamingoes might be a little upscale for this market. I'm in Bristol, so maybe I can come up with some kind of NASCAR item...fused glass beer coozies, perhaps? Slumped fried chicken buckets? I'll keep brainstorming.
Thanks for all the great info! And yes, I am hooked on glass. As a child, I used to melt my crayons on the wall heater in my bedroom, marveling at the swirling colors. Glass fits in well and feeds my "molten" fascination.
Just one more thing...if you don't use raku, what kind of clay do you use? I figure I can just take an existing incense burner and make several impressions in one slab so I can make more than one at a time. Seems like a fairly simple thing to start with.
Thanks,
Jen
Thanks for all the great info! And yes, I am hooked on glass. As a child, I used to melt my crayons on the wall heater in my bedroom, marveling at the swirling colors. Glass fits in well and feeds my "molten" fascination.
Just one more thing...if you don't use raku, what kind of clay do you use? I figure I can just take an existing incense burner and make several impressions in one slab so I can make more than one at a time. Seems like a fairly simple thing to start with.
Thanks,
Jen