Another tile saw question

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Kay
Posts: 36
Joined: Wed Mar 12, 2003 4:20 pm
Location: Under Big Sky

Another tile saw question

Post by Kay »

Has anyone had any experience using the MK 770 tile saw? Have a chanch to buy a used one. Will it do a good job of cutting tile bars?
Don't want to buy a pig in a poke!
Top
Brock
Posts: 1519
Joined: Mon Mar 10, 2003 1:32 pm
Location: Vancouver, B.C.

Re: Another tile saw question

Post by Brock »

Kay wrote:Has anyone had any experience using the MK 770 tile saw? Have a chanch to buy a used one. Will it do a good job of cutting tile bars?
Don't want to buy a pig in a poke!
Yeah, it's fine. Only 1/2 the horsepower of a 101 but it'll do. Get a good blade. Brock
My memory is so good, I can't remember the last time I forgot something . . .
Top
Kay
Posts: 36
Joined: Wed Mar 12, 2003 4:20 pm
Location: Under Big Sky

tile saw

Post by Kay »

Thanks Brock! Will give it a try.
Top
Post Reply

Return to “Techniques and Tools”