Got rid of my devit, now holes
Posted: Fri Jul 18, 2003 9:04 am
Hi all,
Got rid of my devit. Thanks for your help.
Last night I fused a circular piece with shapes on top. I added some
frit in spaces between the pieces. The frit was not all exactly the same
size as I smashed it myself.
As I was flash venting, I saw two smooth holes toward the bottom
of the circle.
Could this be a result of uneven sized frit? Or do you think my
shelf isn't as smooth as it should be? I am using kiln wash, dried
in the kiln, then smoothed out and the dust shaken off.
I haven't used fiber paper and thought this was just for bubbles.
There were no bubbles.
Thanks for any help you can give.
Maggie May
Got rid of my devit. Thanks for your help.
Last night I fused a circular piece with shapes on top. I added some
frit in spaces between the pieces. The frit was not all exactly the same
size as I smashed it myself.
As I was flash venting, I saw two smooth holes toward the bottom
of the circle.
Could this be a result of uneven sized frit? Or do you think my
shelf isn't as smooth as it should be? I am using kiln wash, dried
in the kiln, then smoothed out and the dust shaken off.
I haven't used fiber paper and thought this was just for bubbles.
There were no bubbles.
Thanks for any help you can give.
Maggie May