Page 1 of 1
kiln rental for fusing in Minneapolis
Posted: Sat Aug 02, 2003 5:09 pm
by swatee
I am going to be moving to the Minneapolis area and I having been searching with no luck to find a studio or workshop that rents kiln time for fusing pieces. Does anybody know of such a resource in the Minneapolis metro area? Any advice would be most welcome. Thanx!
Warm Regards,
Swatee
Posted: Mon Aug 04, 2003 7:56 am
by Susan Wright
Try the stained glass shops that offer fusing classes. You may have to take a class to get on their use list. If all else fails, Peachy's Stained Glass in Superior WS rents kiln space and that's only 3 hours away.
We winter in TX and that's not that far in TX.
Susan W
Posted: Mon Aug 04, 2003 11:06 am
by Kris Weber
I am not aware of a local (Mpls/St P) shop or studio that rents kiln time for glass, but someone from the following list might be able to help you out.
J.Ring Glass Studio
651.644.8193
Joe Ring & Susan Thrash
I know that Joe and Susan do not rent out their kilns. They do offer basic classes and offer a good selection of fusible glasses (90 & 96), Jen Ken kilns, etc. Wholesale purchasing is possible through J. Ring.
MN Ceramic Supply
651.774.7007
The local Paragon distributor and home to Saint Mike the Kiln Saver. MN Ceramic Supply carries a number of lines of kilns and may be able to direct you to someone who is willing to rent kiln time for glass.
Continental Clay
800-432-CLAY
Another excellent TC supplier for kilns, kiln supplies, and materials. Again, they do not rent kiln time, but may know of someone who does.
Northern Clay Center
http://www.northerclaycenter.org
612.339.8007
Fabulous resource for ceramists. Northern Clay does offer studio and kiln rental. I am not sure whether or not that includes glass artists, but it might be worth a call. Their gallery is definitely worth visiting regularly -- excellent shows and sales.
just in case you need refractory materials in large quanties...
Smith & Sharpe Co
612.331.1345
Welcome to the area! I hope this helps some.
Kris
Posted: Mon Aug 04, 2003 5:14 pm
by Valoir
Hi - Please send me an email at
valoir@bitstream.net
I am doing glass fusing in Minneapolis and plan on having an open studio day on Sept 27. Let me know if you are interested in this one or in future.
Valerie Tremelat
http://www.valoirdesigns.com