Page 1 of 1

Adjusting Your Chicago Tile Saw Part Three

Posted: Thu Aug 28, 2003 4:11 pm
by Randy W
Even though it was square, the table slid a little diagonally. I fixed that by placing a very thin fiber washer between the table and the sliding bracket. The pencil is pointing at it.

Image

Here is a close up.
Image

Randy

Posted: Thu Aug 28, 2003 8:36 pm
by jim simmons
Thank you so much, Randy. You did me a great favor, and probably several other people also. =D> =D> \:D/
Jim