New Pieces

Want to share a photo of your work? Or get feedback on a new piece? Post it here. (Note: items in this forum are deleted periodically, generally after several months.)

Moderator: Brad Walker

Post Reply
Aryana B. Londir
Posts: 8
Joined: Sun Mar 09, 2003 11:22 pm
Location: Cave Creek, AZ
Contact:

New Pieces

Post by Aryana B. Londir »

Here are two niew pieces just finished for your perusal....

http://aryana2.com/images/cinnamon.jpg
http://aryana2.com/images/flattery_web.jpg

Thanks for looking,
Aryana
Ann Demko
Posts: 104
Joined: Mon Mar 10, 2003 11:54 pm
Location: Owensboro, KY

pics

Post by Ann Demko »

Aryana, Wanted to but couldn't get the pages to load so I could see. Will keep checking (there's that word again) to see if it was me or if it was the format Ann
Judd
Posts: 295
Joined: Mon Sep 01, 2003 9:45 am
Location: Arkansas

Very nice

Post by Judd »

I liked both works, but the colors of Flattery appealed to me. What were the sizes, and what were your methods?
Judd
Ann Demko
Posts: 104
Joined: Mon Mar 10, 2003 11:54 pm
Location: Owensboro, KY

new

Post by Ann Demko »

Got to see the pics. I like them both a lot. Cinnamon strikes a chord. Like the concept. Ditto on the quesstions of how they were done. Ann
Aryana B. Londir
Posts: 8
Joined: Sun Mar 09, 2003 11:22 pm
Location: Cave Creek, AZ
Contact:

Post by Aryana B. Londir »

Thank you very much for your compliments. "Flattery" is an 11" triangle slumped in a shallow mold. It is comprised of three pieces joined together on a clear base with pattern bars, full fused, then tack fused with stringers and gold dots. "Cinnamon" is 16" high x 6" wide, made with frit wafers which were full fused onto the top and bottom pieces. Addiional frit applied and tack fused. The center portion was a lot of frit tack fused onto two layers. The stand was made by Dick Kolpak, and has iron spacers to divide the sections.
Post Reply