Cake Plate

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
twinkler2
Posts: 45
Joined: Fri Aug 22, 2003 2:37 pm
Location: Happy Valley, PA
Contact:
Contact twinkler2

Cake Plate

Post by twinkler2 »

Hi

I've fused a large cake plate (12 in. round) The design is done around the edges.
It looks okay But it doesn't POP :)
I would like to know if I could fuse another smaller circle in the middle to add more color and definition before I slump it into shape.

I've worked hard on it and I'm affraid of it cracking :(

Thanks for some advice

Me Kim
Top
Brock
Posts: 1519
Joined: Mon Mar 10, 2003 1:32 pm
Location: Vancouver, B.C.

Post by Brock »

Yes you can. Go up slower because you now have a thicker blank. Brock
My memory is so good, I can't remember the last time I forgot something . . .
Top
Post Reply

Return to “Techniques and Tools”