Disappearing act~~~~~~~~~~

Vickie · Post by **Vickie** » Fri Jan 30, 2004 10:45 pm

Hi all,
I just received my new Tauras 3 ring saw, and want to know of a good marking pen that will not wash away my pattern, with all the water that is being sprayed on the glass.
Thanks,
Vickie

Nancy Juhasz · Post by **Nancy Juhasz** » Fri Jan 30, 2004 10:50 pm

Hi Vicki, I don't have the Tarus III yet just ordered it today but I do have the Gryphon Wire saw. I use chap stick over my black marking pen and it keeps the mark on pretty good. Just mark the chapstick you use on the glass. lol Nanc

Lynn g · Post by **Lynn g** » Fri Jan 30, 2004 11:17 pm

Yes, chapstick works, or just a light coat of plain old vaseline!

Candy Kahn · Post by **Candy Kahn** » Fri Jan 30, 2004 11:19 pm

OR, you an use rubber cement or spray adhesive.

candy

Alecia Helton · Post by **Alecia Helton** » Sat Jan 31, 2004 12:28 am

Or rub with a candle. It's not as messy as using chapstick.

Alecia

jerry flanary · Post by **jerry flanary** » Sat Jan 31, 2004 1:55 am

or stip the two step and use a grease pencil.

Judy Schnabel · Post by **Judy Schnabel** » Sat Jan 31, 2004 11:29 am

I've used the Deco (?) pen with good success. I get them through The Art Glass House. You can get white or black. One time I couldn't find my Deco so I used my Pilot pen. Same thing happened with me. The mark washed away before I could get the blade to it.

I tried Vaseline on the mark but hated cleaning off all that grease, so I ordered more pens.

Judy

Linda Hassur · Post by **Linda Hassur** » Sat Jan 31, 2004 8:46 pm

There's a product made especially for this called "mark stay" I use that but lst use a Pilot metallic pen. The two used together (make sure the pen line is completely dry before smearing on the "mark stay") usually stays on during the cutting process. I have a Gryphon saw. Linda

Tony Serviente · Post by **Tony Serviente** » Sat Jan 31, 2004 10:31 pm

I have a Taurus III and do the same as Linda. Pilot gold marker and markstay are the best I've found. I have also had people tell me that vaseline, or rubbing a candle on the mark are also effective.

Mark Kemp · Post by **Mark Kemp** » Sun Feb 01, 2004 2:22 am

Whatever kind of pen you use, if you allow it to dry awhile (probably a days is best, but at any rate give it some time), it won't come off as readily. I haven't found anything really perfect -- the combination of vibration and water is very effective at lifting marks or rubber cement. The most sure method I found was to use a Pebeo marker, Vitrail or ...whatever the other line is

, and bake it on. Because the mark is thin, it doesn't have to dry long, and doesn't have to bake long. I haven't had much luck with the vaseline/chapstick method: I have a hard enough time seeing the mark through the water; with goo on top of it, I can only guess where the line really is.

Lynn g · Post by **Lynn g** » Sun Feb 01, 2004 5:04 am

You only need the thinnest of coatings with vaseline...it doesn't need to be thick or gooey. Just touch your fingertip to the vaseline and wipe it over the mark. That way you can see through it and the residue comes off when you wipe the water off after you're done cutting/grinding. The Markstay stuff works, too, but considering the price differential and easy availability, I much prefer the Vaseline (even cheaper if you don;t insist on name-brand!!)