Time to purchase small wet belt sander - need your input
Moderators: Brad Walker, Tony Smith
Time to purchase small wet belt sander - need your input
My glasswork has gotten to the level that has me thinking more about coldwork. I believe that I need to get a Wet Belt Sander, and any feedback would be most appreciated.
It needs to be small - my studio does not have room for large belt sander, so I'm thinking "tabletop" would be just right.
I have seen the Griffin online, and I have read both positive and negative comments about it.
Came across the Glastar B15 that has a 2in. wet belt AND a polishing/grinding wheel on one unit. Have not searched for comments yet.
It seems to me that I would use the belt sander a lot more than I would use a lap grinder/sander . . . but not sure. What do you think?
Or am I better off to stick with Diamond pads and good, old fashioned elbow-grease?
It needs to be small - my studio does not have room for large belt sander, so I'm thinking "tabletop" would be just right.
I have seen the Griffin online, and I have read both positive and negative comments about it.
Came across the Glastar B15 that has a 2in. wet belt AND a polishing/grinding wheel on one unit. Have not searched for comments yet.
It seems to me that I would use the belt sander a lot more than I would use a lap grinder/sander . . . but not sure. What do you think?
Or am I better off to stick with Diamond pads and good, old fashioned elbow-grease?
-
- Posts: 186
- Joined: Tue Dec 29, 2009 7:13 pm
- Location: Nahant Massachusetts
- Contact:
Re: Time to purchase small wet belt sander - need your input
Check out the Covingtons on the link below, these are nice small units. I have a bigger unit now but I had a Gryphon table top and would recommend you stay away from Gryphon, I had problems from day one, service sucked and they never took care of their problem. I have talked to many other fusers who are not happy with the Gryphon.
http://www.covington-engineering.com/belt_sanders.htm
Bob
http://www.covington-engineering.com/belt_sanders.htm
Bob
-
- Posts: 381
- Joined: Sun Mar 09, 2003 9:09 pm
- Location: Ontario
Re: Time to purchase small wet belt sander - need your input
If your studio is a finished room inside your house, then that is not the place for a wet belt sander.....too messy. Depending on your circumstances you could maybe plan on having it in a garage or out building..then you could get the big one which is much more versatile. Just my 2 cents.
"The Glassman"
Re: Time to purchase small wet belt sander - need your input
I've got a floor model WBS with wheels on it, in my garage. Easy to roll outside and wash off after every use. I considered the table top size but decided if I wanted to work with larger and heavier pieces the features of the floor model would suit me better. Up to that time I was using a Lortone combination machine which did the job on small pieces but severely limited me on anything over 14 inches. I am really happy with the floor model. My 2 cents too.
ps. I kept the Lortone in the garage as well, wet sanding is a messy job, especially water on the floor when you get to the finer grits.
ps. I kept the Lortone in the garage as well, wet sanding is a messy job, especially water on the floor when you get to the finer grits.
-
- Posts: 2339
- Joined: Tue Mar 11, 2003 12:06 am
- Location: Chatham NH
- Contact:
Re: Time to purchase small wet belt sander - need your input
I buck the trend and use a small, hand held, dry belt sander.
http://www.crlaurence.com/crlapps/showl ... elID=40581
I have the tabletop Covington 24" wetbelt sander. I rarely choose to use it.
http://www.crlaurence.com/crlapps/showl ... elID=40581
I have the tabletop Covington 24" wetbelt sander. I rarely choose to use it.
Bert
Bert Weiss Art Glass*
http://www.customartglass.com
Furniture Lighting Sculpture Tableware
Architectural Commissions
Bert Weiss Art Glass*
http://www.customartglass.com
Furniture Lighting Sculpture Tableware
Architectural Commissions
-
- Posts: 273
- Joined: Sat Oct 25, 2003 8:18 pm
- Location: Calgary, Canada
- Contact:
Re: Time to purchase small wet belt sander - need your input
Like Bert said, the hand helds are a great inexpensive tool. You can achieve a complete polish with them also.
I will sometimes put a water drip line (smal amount off water) on the area I'm polishing to keep heat and dust down. They also make a polishing oil to spray on the belts, works good also.
http://www.crlaurence.com/crlapps/showl ... elID=13754
I will sometimes put a water drip line (smal amount off water) on the area I'm polishing to keep heat and dust down. They also make a polishing oil to spray on the belts, works good also.
http://www.crlaurence.com/crlapps/showl ... elID=13754
Rick Wilton
-
- Posts: 381
- Joined: Sun Mar 09, 2003 9:09 pm
- Location: Ontario
Re: Time to purchase small wet belt sander - need your input
I don't know what type or size of work your planning but a "dry", hand held grinder suggested above would not come close to providing the precise, quality work I can do with my WBS!! Don't cheap out with your tools!...it will show in your end products.
"The Glassman"
-
- Posts: 273
- Joined: Sat Oct 25, 2003 8:18 pm
- Location: Calgary, Canada
- Contact:
Re: Time to purchase small wet belt sander - need your input
Don,
I have a 4x106 sander a couple of 1" x 30" a 4"x 36" and the hand held machine we mentioned. The absolutely least used one of the bunch is the "professional" 4 x 106. I can achieve an optical polish with my hand held very easily. I been in many professional glass shops that use these for many uses, these are glass shops that have polishing equipment that costs over $100,000 and they'll use the $100.00 hand sander to finish off a rounded corner or polish a mitered edge.
I have a 4x106 sander a couple of 1" x 30" a 4"x 36" and the hand held machine we mentioned. The absolutely least used one of the bunch is the "professional" 4 x 106. I can achieve an optical polish with my hand held very easily. I been in many professional glass shops that use these for many uses, these are glass shops that have polishing equipment that costs over $100,000 and they'll use the $100.00 hand sander to finish off a rounded corner or polish a mitered edge.
Rick Wilton
-
- Posts: 2339
- Joined: Tue Mar 11, 2003 12:06 am
- Location: Chatham NH
- Contact:
Re: Time to purchase small wet belt sander - need your input
Where is the like button?Rick Wilton wrote:Don,
I have a 4x106 sander a couple of 1" x 30" a 4"x 36" and the hand held machine we mentioned. The absolutely least used one of the bunch is the "professional" 4 x 106. I can achieve an optical polish with my hand held very easily. I been in many professional glass shops that use these for many uses, these are glass shops that have polishing equipment that costs over $100,000 and they'll use the $100.00 hand sander to finish off a rounded corner or polish a mitered edge.
Since my work tends to be large, I prefer bringing the sander to the glass instead of vice versa. My dry belt sander is one of the most used tools in my shop. I sand each sharp edge of every piece of glass I cut. Because there is no water, cleanup is really easy. The big deal is that I don't cut my fingers during cleanup.
When I need a grind and polish, I start with 120, go to 220, and then 400. After 400. fire polish works perfectly. The sander has a roller platen that I prefer to use. Mostly I work dry. Yes you can over heat, but you have to work at it. If I am worried, I grab the bottle of glass cleaner and give it a schpritz. Either that or move on and come back after it cools down a bit. The belts are designed for both wet and dry sanding.
I would like a wet diamond angle grinder for the larger areas. However my belts are 1-1/8" wide, and most of my work is within that range.
I got my first one of these when I bought out a whole set of tools from a mirror shop that went out of business, sheet dolly, suction cups, belt sander etc. I finally wore out the Makita. I replaced it with CRL's cheap Chinese knock off. It is a lot less expensive than the Makita and you get what you pay for. You will find this tool in most neighborhood glass shops, and like Rick said, they also have a 4 x 106 wet belt.
Bert
Bert Weiss Art Glass*
http://www.customartglass.com
Furniture Lighting Sculpture Tableware
Architectural Commissions
Bert Weiss Art Glass*
http://www.customartglass.com
Furniture Lighting Sculpture Tableware
Architectural Commissions
Re: Time to purchase small wet belt sander - need your input
I know they are handy for arrissing large pieces, but can you do a small plate or bowl?Rick Wilton wrote:Don,
I have a 4x106 sander a couple of 1" x 30" a 4"x 36" and the hand held machine we mentioned. The absolutely least used one of the bunch is the "professional" 4 x 106. I can achieve an optical polish with my hand held very easily. I been in many professional glass shops that use these for many uses, these are glass shops that have polishing equipment that costs over $100,000 and they'll use the $100.00 hand sander to finish off a rounded corner or polish a mitered edge.
Most people here are not edging large pieces of float glass, they want to grind and polish smaller work.
-
- Posts: 273
- Joined: Sat Oct 25, 2003 8:18 pm
- Location: Calgary, Canada
- Contact:
Re: Time to purchase small wet belt sander - need your input
Yes you can, no it's not the ideal tool for it, but it does work. I clamp a piece to my bench and use the hand held when appropriate. I don't have to use it for that much anymore but did often in the past.
Yes a real WBS is better but for those with lack of space and or cash it's very useful.
Yes a real WBS is better but for those with lack of space and or cash it's very useful.
Rick Wilton
-
- Posts: 308
- Joined: Sun Mar 09, 2003 7:09 pm
- Location: Sun City West (NW Phoenix), AZ
- Contact:
Re: Time to purchase small wet belt sander - need your input
The medium size Covington WBS (41 1/2" belt) worked great for me for many years until I had the room and could afford a large CRL 106" machine. I still have the Covington and use it occassionally.
I agree with Brock. I can't visualize taking the machine to the work for the things I make; sushi plates, bowls, platters, etc. Using a hand held grinder dry sounds unhealthy and wet sounds very messy.
Jim
I agree with Brock. I can't visualize taking the machine to the work for the things I make; sushi plates, bowls, platters, etc. Using a hand held grinder dry sounds unhealthy and wet sounds very messy.
Jim
"With or without religion, good people can behave well and bad people can do evil; but for good people to do evil—that takes religion. " Steven Weinberg
-
- Posts: 23
- Joined: Sat Jul 18, 2009 10:10 pm
Re: Time to purchase small wet belt sander - need your input
Where does an angle grinder come into play? I saw one described for use in coldworking on "Glasscampus.com". The picture with the text was of a MK machine with a water supply hose attatched and the statement that it could be used on flat surfaces.....??
Re: Time to purchase small wet belt sander - need your input
That's exactly right, they are for flat surfaces, not edging. Here is a good supplier:
http://www.calibrestonetools.com/
http://www.calibrestonetools.com/
Re: Time to purchase small wet belt sander - need your input
bob proulx wrote:Check out the Covingtons on the link below, these are nice small units. I have a bigger unit now but I had a Gryphon table top and would recommend you stay away from Gryphon, I had problems from day one, service sucked and they never took care of their problem. I have talked to many other fusers who are not happy with the Gryphon.
http://www.covington-engineering.com/belt_sanders.htm
Bob
Agree with staying away from 'crafters' tools; wish I had the money back spent on the Gemini Apollo ring saw and accessories!
I have the Covington 464WBS which is their basic vertical WBS. Nothing better for what it's designed to do; however, have been considering whether the horizontal 460WBS might be good too; would appreciate feedback on this.
Also find the use of oil rather than water interesting. It would seem that oil could be used with a WBS as effectively as with a dry sander or angle grinder. Would appreciate insight on this issue too.
Jerry
-
- Posts: 2339
- Joined: Tue Mar 11, 2003 12:06 am
- Location: Chatham NH
- Contact:
Re: Time to purchase small wet belt sander - need your input
Once upon a time, there were not glass fabricating shops with 5 and 6 figure glass polishing machines, in every region. There were neighborhood glass shops with a 4 x 106 wetbelt and either a 3 x 24 dry belt or an 1-1/8" x 21" dry belt (or both). They would run through the belts, stopping at either 400 or cork, and give the belt a spray with the polishing oil, and give it the final pass by (without running water). This yields a nice matte finish. They rarely had a felt wheel to bring it to high polish. We are talking about edging table tops, shelves, mirrors, etc.
Today, you just order it and it comes through with a high polish. (unless they only bother to matte polish, which has certainly happened to me when I least expected it)
Today, you just order it and it comes through with a high polish. (unless they only bother to matte polish, which has certainly happened to me when I least expected it)
Bert
Bert Weiss Art Glass*
http://www.customartglass.com
Furniture Lighting Sculpture Tableware
Architectural Commissions
Bert Weiss Art Glass*
http://www.customartglass.com
Furniture Lighting Sculpture Tableware
Architectural Commissions
Re: Time to purchase small wet belt sander - need your input
Hi,
I have also been thinking of buying the small Covington WBS, but shipping it to the UK and paying 20% tax, pushes the cost up past $900. So I was interested to read that you can get good results from a dry hand held sander. If a hand held dry sander works well, can you also get good results from using a dry table mounted 4" x 36" belt sander?
thanks
Andrew Openshaw
I have also been thinking of buying the small Covington WBS, but shipping it to the UK and paying 20% tax, pushes the cost up past $900. So I was interested to read that you can get good results from a dry hand held sander. If a hand held dry sander works well, can you also get good results from using a dry table mounted 4" x 36" belt sander?
thanks
Andrew Openshaw
-
- Posts: 302
- Joined: Sun Jul 06, 2003 4:36 pm
- Location: Glasgow, Scotland
- Contact:
Re: Time to purchase small wet belt sander - need your input
andy o wrote:Hi,
I have also been thinking of buying the small Covington WBS, but shipping it to the UK and paying 20% tax, pushes the cost up past $900. So I was interested to read that you can get good results from a dry hand held sander. If a hand held dry sander works well, can you also get good results from using a dry table mounted 4" x 36" belt sander?
thanks
Andrew Openshaw
Andrew,
There is a distributor of Covington machines in Cumbria. This may reduce costs a bit.
Steve Richard
You can view my Blog at: http://verrier-glass.blogspot.com/
You can view my Blog at: http://verrier-glass.blogspot.com/
Re: Time to purchase small wet belt sander - need your input
Stephen,
Thanks for the reply, so you have a company name for the Covington supplier based in Cumbria?
I can't find them using Google.
Thanks
Andrew
Thanks for the reply, so you have a company name for the Covington supplier based in Cumbria?
I can't find them using Google.
Thanks
Andrew
-
- Posts: 302
- Joined: Sun Jul 06, 2003 4:36 pm
- Location: Glasgow, Scotland
- Contact:
Re: Time to purchase small wet belt sander - need your input
Andrew,
I can't find them either, so I have written to the company asking.
I might be interested in becoming a distributor myself, if there are now none in the UK.
I can't find them either, so I have written to the company asking.
I might be interested in becoming a distributor myself, if there are now none in the UK.
Steve Richard
You can view my Blog at: http://verrier-glass.blogspot.com/
You can view my Blog at: http://verrier-glass.blogspot.com/