Element support rods

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
Terry Gallentine
Posts: 190
Joined: Mon Jul 19, 2004 2:08 pm
Location: River Falls, WI
Contact:
Contact Terry Gallentine

Element support rods

Post by Terry Gallentine »

Does anybody out there have a good source for rods (probably mullite) used for supporting kiln elements from a kiln ceiling?
Top
Rick Wilton
Posts: 273
Joined: Sat Oct 25, 2003 8:18 pm
Location: Calgary, Canada
Contact:
Contact Rick Wilton

Re: Element support rods

Post by Rick Wilton »

http://www.duralite.com/kiln-furnace-studio.htm

Duralite sells them, you may want to consider the quartz tubes, that's what I've used in the kilns I've made.
Rick Wilton
Top
Post Reply

Return to “Techniques and Tools”