Page 1 of 1
Can I slump onto Bullseye paper?
Posted: Sat Mar 30, 2013 6:56 am
by JeffP
If I cut a shape from fibreboard and use it to slump a plate, can I just put Bullseye paper under it to slump onto, or must I slump onto a prepared shelf?
Re: Can I slump onto Bullseye paper?
Posted: Sat Mar 30, 2013 7:01 am
by Brock
I've always used a shelf because I don't like the expense or smell of the paper, but it will work fine.
Re: Can I slump onto Bullseye paper?
Posted: Sat Mar 30, 2013 9:10 am
by Bert Weiss
Thinfire paper can easily tear. So it is best to place it on a kilnwashed shelf. The wash does not have to be fresh. Should the glass come in contact with a raw shelf, it will stick and ruin the piece.