Square slumber A or B?
Posted: Sat Sep 14, 2013 11:14 pm
Hi everyone,
I have a project where I will need to buy several molds (6 of the smaller sizes, 3 or 4 of the larger ones).
Bullseye catalogue 8, page 52 shows square slumper A (http://shop.bullseyeglass.com/square-sl ... -mold.html) and B (http://shop.bullseyeglass.com/square-sl ... -mold.html).
From the sizes, I like B, because it has a better range in the smaller sizes. And, from the sketch, it seems to have a flat bottom. Unfortunately the pictures of the actual glass fused into these molds look exactly the same.
Before I invest in all these molds, would much appreciate your advice as to which one has a nicer, better shape. A plate fused into B, does it really have a flat bottom?
I will be using two layers totaling 1/4".
Many thanks, seachange
I have a project where I will need to buy several molds (6 of the smaller sizes, 3 or 4 of the larger ones).
Bullseye catalogue 8, page 52 shows square slumper A (http://shop.bullseyeglass.com/square-sl ... -mold.html) and B (http://shop.bullseyeglass.com/square-sl ... -mold.html).
From the sizes, I like B, because it has a better range in the smaller sizes. And, from the sketch, it seems to have a flat bottom. Unfortunately the pictures of the actual glass fused into these molds look exactly the same.
Before I invest in all these molds, would much appreciate your advice as to which one has a nicer, better shape. A plate fused into B, does it really have a flat bottom?
I will be using two layers totaling 1/4".
Many thanks, seachange