Page 1 of 1
Spray A question
Posted: Fri Feb 13, 2004 5:44 am
by Valla E
Question: What do you use for a sprayer for BE Spray A? The unit that I got eons ago was in a glass container attached to a can with some kind of propellant in it.... that doesn't work any more. I've tried various misting sprayers from garden shops, and still haven't found one that gives a fine enough mist. Suggestions? Thanks!
Posted: Fri Feb 13, 2004 8:42 am
by Kim Bellis
I use a air spray gun. You can get them at any "hobby" store from inexpensive to expensive.
Kim
Posted: Fri Feb 13, 2004 8:42 am
by Mark Hughes
I use an air brush hooked up to my air compressor with the pressure dialed down to about 10 lbs. It gives a nice fine spray.
Posted: Fri Feb 13, 2004 1:41 pm
by Valla E
Thanks! (still hoping for a cheaper alternative!
)
Posted: Fri Feb 13, 2004 1:46 pm
by charlie
you can get a mouth atomizer for very few dollars. you can get an air can propellant spray gun cheaply at hobby places (michaels, for instance).
i've seen a sprayer that can be hooked up to a scuba tank or a spare tire.
Posted: Fri Feb 13, 2004 2:00 pm
by Valla E
Thanks for the tips! Michael's must have an online catalogue..... I'll check!
Posted: Fri Feb 13, 2004 2:17 pm
by Scotty
I bought a very inexpensive ($10) air brush from Harbor Freight.
Posted: Fri Feb 13, 2004 8:16 pm
by Lynn g
Fusion HQ (see link above) has a quick-spray atomizer (mouth sprayer); the latest catalog I have says it's $8.50.
Posted: Fri Feb 13, 2004 10:21 pm
by Valla E
Gee, thanks so much everyone! What a response! Hope I can return the favor sometime.. I really appreciate your taking the time to help me out on this!
Cheers!