did I post it in wrong place?

Post here if you need help on anything related to the board and how things work. If you need help on warm glass topics, use the Kiln-forming Discussion Board.

Moderator: Brad Walker

Post Reply
pjay
Posts: 3
Joined: Sun Mar 26, 2006 2:54 pm
Location: Vancouver Island, BC, Canada

did I post it in wrong place?

Post by pjay »

I posted a topic yesterday Jan 18th called "Room for working on Fused Glass" and noticed to-day it is gone..did I post it in wrong place? Do something wrong?
Not sure how this all works.
As you have so many long time fusers on this forum I was hoping for some advice to set up a fuse glass room.
Thanks Pat
Top
Brad Walker
Site Admin
Posts: 1516
Joined: Fri Mar 07, 2003 9:33 pm
Location: North Carolina, USA
Contact:
Contact Brad Walker

Re: did I post it in wrong place?

Post by Brad Walker »

pjay wrote:I posted a topic yesterday Jan 18th called "Room for working on Fused Glass" and noticed to-day it is gone..did I post it in wrong place? Do something wrong?
Not sure how this all works.
It's here: http://www.warmglass.com/phpBB/viewtopi ... 20&t=41135 (And it's in the right forum!)
Top
Post Reply

Return to “Board Help”