Adding heating element to kiln lid
Posted: Sun Jul 26, 2015 9:48 am
Hi,
I picked up a 16" octagonal ceramic kiln with the standard kanthal side elements. I would like to turn it into a more suitable "glass" kiln by adding an element to the top. I was going to use a router to excavate a deep groove and pin in a Kanthal element. Is there a better way?
Thank you
Bob
I picked up a 16" octagonal ceramic kiln with the standard kanthal side elements. I would like to turn it into a more suitable "glass" kiln by adding an element to the top. I was going to use a router to excavate a deep groove and pin in a Kanthal element. Is there a better way?
Thank you
Bob