etched/sand blasted float and tin side
Posted: Thu Oct 08, 2015 5:57 pm
Ive ordered a piece of 4mm "acid etched" glass from here: (bottom right)
http://gerrysglass.com.au/decoration-glass-2
Its finely etched or sandblasted on one side.
Do you think the etching/sand blasting has removed the tin layer?
Pete
http://gerrysglass.com.au/decoration-glass-2
Its finely etched or sandblasted on one side.
Do you think the etching/sand blasting has removed the tin layer?
Pete