What temp is afap

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
peterbr
Posts: 36
Joined: Tue Feb 24, 2004 8:36 pm

What temp is afap

Post by peterbr »

Here is a stupid question. The first segment is 300 per hour to 1350, then segment 2 is Afap to 960. What temp do I set the kiln at to go afap to 960.

Thanks
Top
Brad Walker
Site Admin
Posts: 1516
Joined: Fri Mar 07, 2003 9:33 pm
Location: North Carolina, USA
Contact:
Contact Brad Walker

Re: What temp is afap

Post by Brad Walker »

For most controllers, it's 9999, which is as fast as can be programmed.
Top
Post Reply

Return to “Techniques and Tools”