wll vases(pockets)
Posted: Sun Feb 22, 2004 11:17 am
I am trying to get directions on how to make a wall pocket in a single firing. Any help?
WarmGlass.com
Guide to fusing, slumping, and related kilnforming techniques
https://warmglass.com/phpBB3/
wll vases(pockets)
Page 1 of 1
Posted: Mon Feb 23, 2004 2:48 am
Well, I've made them with a layer of fiber paper in between the two layers - about 1/4" of fiber which you wash out afterwards. I had lots of trouble with thermal shocking them, cause the fiber shields the bottom glass from the heat, so I gave up after a short while.
wall pockets
Posted: Mon Feb 23, 2004 3:47 am
I am firing some right now! If it works I will let you know how I did it.
Won't know until morning though!
Cyndi Campbell
Won't know until morning though!
Cyndi Campbell
Posted: Mon Feb 23, 2004 7:52 am
hope the firing is successsful.I'm waiting!!!!! 
- nadine
- nadinewall pockets
Posted: Tue Feb 24, 2004 9:41 am
Yes , They worked!
Go get some 1 inch copper pipe from the hardware store and a pipe cutter. Im on my way to work right now but I promise I will get right back to you after work!
Cyndi
Go get some 1 inch copper pipe from the hardware store and a pipe cutter. Im on my way to work right now but I promise I will get right back to you after work!
Cyndi