HD Fiber Board

This is the main board for discussing general techniques, tools, and processes for fusing, slumping, and related kiln-forming activities.

Moderators: Brad Walker, Tony Smith

Post Reply
jim burchett
Posts: 254
Joined: Sun Jun 29, 2003 4:24 pm
Location: Lenoir, NC

HD Fiber Board

Post by jim burchett »

I need to replace the Fiber Board lid on my Glassglow kiln. It doesn't look too hard, just need to find some materia,l looks as if I need a 30x48" piece 2" thick. It doesn't appear there are any other support for this other than the edges, so rigidity is importa.nt. Suggestions?
"No, you cant scare Me, I'm sticking to the UNION. I'm stickin to the UNION till the day I die" Woody Guthrie
Top
Don Burt
Posts: 579
Joined: Sun Mar 09, 2003 8:45 pm
Location: Bloomington, Indiana
Contact:
Contact Don Burt

Re: HD Fiber Board

Post by Don Burt »

This guy was always friendly and reasonable. I haven't bought anything from him for years though:
James M. Wiles
Southern Service Company
9629 Hanover South Trail
Charlotte, NC 28210
Phone: 704 341 5577
Fax: 704 625 3687
Cell: 704 904 2401

http://www.southernserviceco.com/
Top
Brad Walker
Site Admin
Posts: 1516
Joined: Fri Mar 07, 2003 9:33 pm
Location: North Carolina, USA
Contact:
Contact Brad Walker

Re: HD Fiber Board

Post by Brad Walker »

Jim's moved: https://neuex.com/

Good guy. He may have what you need.
Top
jim burchett
Posts: 254
Joined: Sun Jun 29, 2003 4:24 pm
Location: Lenoir, NC

Re: HD Fiber Board

Post by jim burchett »

Contacted Jim, and the other folks you referred me to Brad...working on it. Thanks
"No, you cant scare Me, I'm sticking to the UNION. I'm stickin to the UNION till the day I die" Woody Guthrie
Top
Post Reply

Return to “Techniques and Tools”