Grinding
Moderator: Tony Smith
-
- Posts: 2
- Joined: Thu Nov 11, 2021 10:46 am
Grinding
Had to grind small spot after full fusing. Do I need to fire polish the dull spot before slumping or will the slump firing take care of it
-
- Posts: 773
- Joined: Mon Mar 10, 2003 11:36 am
- Location: Tofino, British Columbia, Canada
Re: Grinding
depends how much roughness there is or if you have hand polished it to smooth. 220 grit could get you close. Warning the slightest amount of grinding residue will show up. Keep wet and clean well.