help...what fusing temp should be used in order to keep the tecture of the herringbone and reed glass intact?
Regards,
scott
Fusing herringbone and Reed Bullseye Glass
Moderators: Brad Walker, Tony Smith
-
- Posts: 224
- Joined: Mon Mar 31, 2003 12:35 pm
- Location: Virginia
- Contact:
Are you going to cap the glass?
Kiln Repair by a Clayman kilnrepair@yahoo.com
Glassworks by a Clayman
http://www.GlassArtists.org/GlassworksByAClayman
Glassworks by a Clayman
http://www.GlassArtists.org/GlassworksByAClayman